Search results

Isn’t there typically different construction techniques used on these cabs also? RL have a thin removable back vs FL with a thick permanent back & easily removable grille. This has to affect the tone..right? I have some old Carvin V212s that I love…FL, vertical, angled.. They have a lot more...

This is what I do with the EQ2.. I also use a SA Reflex to send Midi to do a volume boost which applies to both channels… giving a gain boost in front and a volume boost in loop for a progressive lead channel.

I went to look at my 2nd PS-100 in storage, that isn’t modified, and noticed it has a label on the back jacks. This is a later one made in 1998.. The routing still isn’t very clear so I tested them. The jacks marked “guitar” connect to the front “in” jacks and the “amp” jacks connect to the...

A few tips.. Inside the case at the bottom, there is a tray held down by 2 rivets… Drill out those rivets and remove the tray to give yourself a lot more working room. That will also give you access to the underside of the pedalboard area. The pedalboard area has some areas of flex that can...

I love these pedalboards..they were made in the mid 1990’s. The effects loop jacks are basically just “thru” jacks. I can’t remember how the jacks correlate front to back..you’ll have to test them first. I have never seen a manual for these. Keep in mind the power distribution isn’t...

I have been down this road.. I recommend staying away from the Marshall and Mesa 20/20’s. I read a lot of reviews about the Marshall having overheating problems and bought the Mesa. It ran very hot too and I had to replace power tubes every 5-6 months…that was with regular rehearsal and...

Here’s my two hot Teles..both 7 strings. Agile T-7 with 4 way switch, angled switch plate and Gotoh tuners. Schecter Wes Hauch PT-7 with 2 way pickup switch and Shadow Kill Pot on the volume. The Schecter is my workhorse guitar..stainless frets, plays great and always ready for a gig.

The Crybaby mini 535q auto return is my favorite at the moment..have two in fact. Switchless, 4 position range switch, adjustable Q and adjustable boost.

Cool video and riffage!

Ibanez would be my choice.. better control layout, MIJ and Lo-pro edge. Too bad there’s not a 7 string version.

Just make sure that both cables to and from the Ultra-G are proper speaker cables. No instrument cables!

That is correct..it is not a load box, just a DI w/speaker sim. Just install between amp and speaker cab like shown in the manual. I always had to have one of the -20db pads on to bring the level down.

SD Jazz

OFR is 10” https://www.floydrose.com/products/original-locking-nut?variant=30511210130

Get a new nut.. the R3 for the 1000 series is 12” https://www.floydrose.com/products/1000-series-special-locking-nut-2?variant=31372833357933

That is correct.. you don’t need staggered for angled headstocks. I also recommend Gotoh or Hipshot, both are great tuners.

The loops in the GCX are mono.

The 1000’s are a good trem.. Is this your first Floyd?

I have two CS12s…great power supply and never had any problems with them at home or gigging. The 9v AC outlet is nice too if you have any older Digitech stuff.

I worked and gave guitar lessons at a music store 1991-93 that was a Hamer dealer...and they had that exact same guitar on the wall that I loved playing! Such a killer guitar, but I couldn’t afford it at the time.. On that particular guitar, there was a gnat that got stuck in the finish near...