Two 8 ohm cabs into Pink Taco?

[57Strat777]

I have a Pink taco PT-20 and I want to know if there is a way to plug two 8 OHM cabinets into the Pink Taco? The cabinets are both 8 OHM with a single EVM 12" in each cabinet. The PT-20 owners manual shows I can use one or two 16 OHM cabs, or one 8 OHM cab. Am I SOL on using two 8 OHM cabs?

 

[Gadzz]

Only one 8 ohm cab or one or two 16 ohm cabs but no on two 8 ohm cabs

 

[Metlking]

You could use a custom Y speaker cable to run the cabinets in series and plug into the 16ohm tap, Like this: http://soundcitysite.com/series_cab_wiring.pdf

 

[RACKSYSTEMS]

There is a 4 ohm tap not hooked up. I can if its a must.

 

[57Strat777]

thanks guys. I really appreciate it

 

[57Strat777]

There is a 4 ohm tap not hooked up. I can if its a must.

Thanks Dave. Does that entail converting the two 8 OHM outputs to two 4 OHM outputs? Or could you add two 4 OHM outputs to the back panel and keep the two 8 OHM and one 16 OHM output?

 

[RACKSYSTEMS]

Well could add a switch to go between 8 or 4 on the 2 jacks

 

[frankencat]

If I don’t need the 16 ohm tap can I just move the connections around and end up with 8 and 4?

P.S. Sorry for the necro post.