FS Schecter SLS Blacjjack

pulverizer

Member
All pics are of the axe you will get

$500

3-Piece maple neck
Made with 3 pieces of maple for extra stability. 3-Piece necks can withstand the test of time. Where standard necks may show aging defects from temperature and moisture changes throughout the years, the 3-piece neck will stay nice and straight for a lifetime of playability.

Satin finish and Ultra-Thin profile
The SLS collection features a satin finish neck for lightning fast playing above and below the 12th fret, an Ultra Thin neck profile (19mm at 1st fret/ 20mm at 12th fret), and new Ultra Access neck joint shape for easier access to the last frets.

Ebony fretboard
Ebony has a snappy, crisp attack with the density of maple, but with more brittle grains, oilier pores, and a stronger fundamental tone than maple. It has a tremendous amount of percussive overtones in the pick attack, that mute out shortly thereafter to foster great, long sustain.

Seymour Duncan Full Shred and Jazz passive pickups
The Full Shred contains double rows of Allen screw pole pieces help fine tune the high end, leaving a tone that's fat and chunky, yet perfectly defined for speed riffs. Seymour Duncan's Jazz is a classic moderate output humbucker. Don't let the name fool you; it's not only great for jazz, but also country, blues, funk, classic rock and heavy rock.

Schecter locking tuning machines
These tuners feature a locking screw pin to lock the string into place for greater tuning stability. Details include a 19:1 gear ratio allowing for precise fine tuning adjustments, removable knobs, threaded peghead bushing, and a 10mm diameter peg hole.

Hell's Gate Skull inlay
The Mother of Pearl 'Hell's Gate Skull' inlay compliments the beautiful ebony fretboard. The thin white binding strip adds a nice highlight.







 
Back
Top