That's a Mackie Onyx 1640 w/Firwire Card. The original version, not the newer i1640. Works very well. I currently run the TL S/PDIF into the 11R and the TL LINE OUT into the mixer then into the 11R LINE IN L, giving me two TL tracks. Plugging into the 11R and going out the front OUTPUT TO AMP 1 into the Mark V thru the TL gives me more options. If I ran the 11R's loop into the Mark V there would be even more options. I haven't done this (yet), but love the connectivity option. Several times I've attempted to sell the 1640 and the thought crosses my mind every now and then, but then I come to my senses. It's a great mixer and interface option.guillaume_pille":3f1zkdk0 said:
guillaume_pille":2lxnwda1 said:
Shark Diver":1s9c5tpo said:Redone. PedalPro added. Might change this to an amp instead of the X99 - not sure yet.
hunter":289z2g14 said:
The fx in the PP are super high quality, but there will always be somebody that has to have their favorite pedal over all else. That's why...
Shark Diver":95j81qs4 said:hunter":95j81qs4 said:
Be all, end all to replace a pedal board - no. I mean it never could be. If it had a Klon in it someone would prefer a Timmy instead. But how different is that from liking a 2290 for delays, Lexicon for verb, and Eventide for shifting? Are the verbs in the Eventide great? Of course. But someone will always bitch that it's not as good as Lexicon
it has the 2 loops. I don't use Fuzz, but if I wanted I would add it in the 1st loop - so no problem. Same with Pitch Shift and Reverb. I have a WET reverb in the back of that rack in the 2nd loop (there is a complete mixer in the PedalPro for that loop). But I don't use much of those 2 fx either. I thought about getting an Eventide Eclipse for the 2nd loop, or use the PCM 70 I have, but I just don't use them enough at this time to justify adding them in.
I really like the way and volume expression functions in the PP. I have messed with other functions with the expression pedal. I'd say it is more than worth trying it. He has a 30 day return policy. It really is a great unit. I have $3k plus in pedals for a pedal/rack I was going to build, which I just never did. Not sure that I ever will at this point either.
I think it will be the hub of my rigs for quite a while, especially since it can be integrated into almost any rig.
hunter":6n79e8m2 said:Shark Diver":6n79e8m2 said:hunter":6n79e8m2 said:
Be all, end all to replace a pedal board - no. I mean it never could be. If it had a Klon in it someone would prefer a Timmy instead. But how different is that from liking a 2290 for delays, Lexicon for verb, and Eventide for shifting? Are the verbs in the Eventide great? Of course. But someone will always bitch that it's not as good as Lexicon
it has the 2 loops. I don't use Fuzz, but if I wanted I would add it in the 1st loop - so no problem. Same with Pitch Shift and Reverb. I have a WET reverb in the back of that rack in the 2nd loop (there is a complete mixer in the PedalPro for that loop). But I don't use much of those 2 fx either. I thought about getting an Eventide Eclipse for the 2nd loop, or use the PCM 70 I have, but I just don't use them enough at this time to justify adding them in.
I really like the way and volume expression functions in the PP. I have messed with other functions with the expression pedal. I'd say it is more than worth trying it. He has a 30 day return policy. It really is a great unit. I have $3k plus in pedals for a pedal/rack I was going to build, which I just never did. Not sure that I ever will at this point either.
I think it will be the hub of my rigs for quite a while, especially since it can be integrated into almost any rig.
Thanks. The website is kind of confusing. When you order it with the Footswitch, will it still have the Midi in to be able to remote control via Midi?
Shark Diver":3diu8wqj said:Redone. PedalPro added. Might change this to an amp instead of the X99 - not sure yet.
donfrantz":wkhjp6c2 said:
