Post your pedal board pics..

  • Thread starter Thread starter base341
  • Start date Start date
Death by Uberschall":3pt1kqgg said:
Ventura":3pt1kqgg said:
I'm still working on mine - 2 years in... :lol: :LOL:

Just keep DeathByUberschall off this thread - his board is tits :D
Click to expand...
kasperjensen":3pt1kqgg said:
Yeah seriously... DeathByUbershall... Stay away.
Click to expand...

:aww: :cry:

Pedal%20Board%20008.JPG


Pedal%20Board%20010.JPG


Pedal%20Board%20009.JPG


PP2+ under the board powering everything except the Reverbulator (24v). The OCD pedals and MXR flanger are set to 18v, the Analogman Bi-Chorus and Behringer mini mixer are set to 12v, all other pedals are at 9v. Board measures 36x18.

Each of the effects (except the Bad Horsie II, Decimator G-string & tuner) are in there own loops which are "preset" assignable in any combination and/or can be made to be an add-on to an already activated preset. Both of the OCD's are in the same loop, one just feeds into the other. All "looped" effects pedals stay on all the time. All loops are true bypass when not engaged. The switching unit also handles the amp channel switching and amp loop function as needed (loop stays on all the time though). So basically it's "one button" activation for each of my main sounds. The bottom row and one of the upper row buttons are my main sounds. The other top row buttons are my "add-ons" as needed. Stepping on one of the main preset drops the activated add-ons, really simple for stage use. Basically there is the "A" group of loops (7 loops) for the effects before the amp and the "B" group of loops (3 loops) for effects in the amp's effects loop. One thing that I had added to the switching unit was a common return for the "B" group loops. The Reverbulator and both MXR Carbon Copy's are the "B' group. What this allowed me to do was feed both of the Carbon Copy's outputs to the mini mixer which then feeds the "common return". That way when I switch between presets that change which delay pedal (main or long/solo) is active, the previous delay's input is shut off, but the effect's output does not get cut off and naturally decays away. I may go back and set the Reverbulator up the same way, but right now it just loops back in and then feeds both the Carbon Copy's as needed. The mini mixer also allows me to set my solo level a little higher for a solo boost that follows the presets.

There's so much I could keep talking about with this board, but it would get very long winded. So if anybody has any questions about the routing of the effects, or what any particular effect is used for, etc., just ask. It looks complicated, but it's really simple. Power plug on the side is just a male 3-prong. So any 3-prong extension cord works as the power cord.

:2thumbsup:
Click to expand...

Mr Uberschall.. You win.
Seriously bad ass!!!!
 
Here's my current setup (the cable ties will vanish soon!) with a really crappy iphone camera

PTPro.jpg


This is what my board looked like for a while...with an SLR

IMG_6475.jpg
 
^ 2 Kingsley Minstrels, that is awesome. I am GASing for a Jouster.
 
Pretty simple....tuner, gate and two boost options.
Sitting on a piece of edged wood shelving from an old retail fixture I found at work.

 

Attachments

  • DSC07555.JPG
    DSC07555.JPG
    271.8 KB · Views: 8,450
To answer the questions about my board:
-The orange stompbox is an analogman orange squeezer (compressor).

The pedals are (from top - bottom - left - right):
Malekko Spring Chicken Reverb
BBE Sonic Stomp
Klon Centaur
ISP Decimator
Empress Superdelay (Vintage Modified)
Luther Drive
Analogman Orange Squeezer
Malekko Omricon Fuzz (Superfuzz clone)
CAE MC404 Wah
Dr. Scientist Cosmichorus
Dr. Scientist Tremolescence
Ethos Overdrive
Pitch Black Tuner

And thanks for the kind words guys :thumbsup:
 
blackba":2fmrydx3 said:
^ 2 Kingsley Minstrels, that is awesome. I am GASing for a Jouster.
Click to expand...

Hey mate, yeah the Kingsley pedals are great!

They are actually a Jugger (channel one only) and a Minstrel.

I got the Juggler rehoused by Simon into the Minstrel chassis with a tube based cathode follower added. They are fantastic pedals if you want a valve like sound and feel. I think they are as good as stand alone rack mounted preamps (of which I owned three and quickly sold off).

The awesome thing about having one of these on your board is that is you have an 'issue' with your amp, you can always plug straight into an FX return or SS poweramp (I have a EHX Mag .44 poweramp pedal) and you're still good to go.
 
The Hoff":2bnx09b2 said:
To answer the questions about my board:
-The orange stompbox is an analogman orange squeezer (compressor).

The pedals are (from top - bottom - left - right):
Malekko Spring Chicken Reverb
BBE Sonic Stomp
Klon Centaur
ISP Decimator
Empress Superdelay (Vintage Modified)
Luther Drive
Analogman Orange Squeezer
Malekko Omricon Fuzz (Superfuzz clone)
CAE MC404 Wah
Dr. Scientist Cosmichorus
Dr. Scientist Tremolescence
Ethos Overdrive
Pitch Black Tuner

And thanks for the kind words guys :thumbsup:
Click to expand...

Tell me... Is yours a one off pedal board? Or can you buy them on sale?
 
kasperjensen":vdm77qk6 said:
The Hoff":vdm77qk6 said:
To answer the questions about my board:
-The orange stompbox is an analogman orange squeezer (compressor).

The pedals are (from top - bottom - left - right):
Malekko Spring Chicken Reverb
BBE Sonic Stomp
Klon Centaur
ISP Decimator
Empress Superdelay (Vintage Modified)
Luther Drive
Analogman Orange Squeezer
Malekko Omricon Fuzz (Superfuzz clone)
CAE MC404 Wah
Dr. Scientist Cosmichorus
Dr. Scientist Tremolescence
Ethos Overdrive
Pitch Black Tuner

And thanks for the kind words guys :thumbsup:
Click to expand...

Tell me... Is yours a one off pedal board? Or can you buy them on sale?
Click to expand...
Rooster doesn't make them like this anymore. There are a few out there like it though. My board is actually #7, the seventh one Rooster ever assembled. So it is apart of his earlier work.
 
As previously posted.
 

Attachments

  • Pedalboard.jpg
    Pedalboard.jpg
    83.2 KB · Views: 3,573
Gutmann":1g2ua5ov said:
Steve Mavronis":1g2ua5ov said:
Finally completed populating my Pedaltrain Mini that I got for Christmas! It's my first ever pedal board. I got the last two new pedals on the left just this New Year weekend at great sale prices! The RC-3 is shown offset here thinking I'd plug my Boss FS-6 dual foot pedal into the extra jacks. The photo was taken right after I added the looper to the board. I've since spaced all the pedals evenly because it looks nicer to me and don't really need the FS-6 feature.

DSCN5306crop1024x768.JPG
Click to expand...


Is this a custom colored pedaltrain? Looks great :thumbsup:
Click to expand...

Yeah, I bought 2 of these platinum ones from GC at Xmas. They said they only had 5 so I said give me 2. I started on a small board for myself, not sure if I'll use the other one or not.
 
photo-6.jpg


I'd recommend

Delay: El Capistan It's the most amazing pedal I've owned.

Chorus: analogman bi chorus

Boost: suhr kokoboost

Flanger: Hartman - amazIng flanger and the filter setting is outstanding!
 
You must log in or register to reply here.
Back
Top