DECEMBER

Boogie Mark V 90W Carvin V3 Line 6 Flextone III XL Mk V is the preamp, Mk V & V3 are the power amps for the stereo dry channels &...

TC Electronic what? A noise gate? The Sentry? And what is the "shiny silver pedal"?

Problem #1 is that I'm in an apartment, can't make any modifications to the wiring. Problem #2 is that 90% of my noise is EM/RF from...

The efficacy of any noise solution depends on what's causing the noise. The Humno, Hum Exterminator, and Hum Eliminator, will do nothing...

Active ceramic. And that opens up the possibility of putting in active EQ pots that can cut the bass. Pickups in the neck position will...

My amp (Mark V) has a slave out. I hooked that up and the Suhr RL XLR and 1/4" outputs to the interface. They all sound exactly the...

Here's the audio clips: soundcloud.com/matemberkins/reactive-load-comparisons Comparing reactive load boxes. IRs were made of my...

I use the slave out from the amp, not the outputs on the boxes. But I have compared the slave out to the Suhr XLR and 1/4" outs and they...

What do you recommend? Like December I feel the suhr is bad bass heavy and mid scooped.

So I hooked up an 8 ohm 4x12 (2 V30's, MC-90, Jensen Tornado Stealth 80) and recorded the same riff on the same exact settings (Mark V...

I have a 3-amp, 5-speaker, 9-mic stereo wet/dry/wet rig that I've recreated with IRs that I made of my speakers. Using a Behringer...

A mono signal CANNOT have phase cancelation within itself. There has to be at least 2 signals from the same source for there to be any...

Putting a speaker in the Thru jack overrides the Suhr's internal load, it doesn't run in parallel with it. It's 8 ohms only. You either...

Yeah, that's my point... there aren't any true stereo load boxes. If you have a 2 or 3 amp rig, you'll need 2 or 3 load boxes to record...

I have them all- Two Notes Live and Reload, Rockcrusher Recording, Suhr Reactive load, Aracom, Faustine, and some resistive ones (Komet...