Top wrap it. Set the action low and take all the relief out of the neck you can without it being a buzzy mess that frets out. Balance that bridge height and relief until it plays good. Lemme know how it goes. My Bigsby equipped Edwards ES is about the lightest string tension of any guitar I've owned until I top wrapped my Edwards LP. String gauges on both are 10 11.5 15 20 30 39, the bottom three are flatwounds.no never did
Maybe it's the way they rest against your body. The angles are slightly different. They feel different to the right hand too for the same reason.same 10s. same relief. string bending is not easy on any that i own or tried
raised up the TP. didn't do anything
maybe need to try 9s?
You gotta wear your strap over your right shoulder and carry it like a mailbag. Then it rests on your hip. Plus it don't geek the tilt on your lid trying to get it over your head. That's how I do it but what the heck do I know, I use banjo picks.Maybe it's the way they rest against your body. The angles are slightly different. They feel different to the right hand too for the same reason.
I never noticed this inherent difference. There's other factors that can make it seem harder to bend - nut and fret height, and neck profile for example.same 10s. same relief. string bending is not easy on any that i own or tried
raised up the TP. didn't do anything
maybe need to try 9s?
Try a roller bridge.On my ES the high string(s) will pop right out of the saddle notches during normal playing if I top wrap
I guess my bridge is too low, but I didn't find it made much of a difference anyway
Give the frets a good polish and see how it is.same 10s. same relief. string bending is not easy on any that i own or tried
raised up the TP. didn't do anything
maybe need to try 9s?
I've yet to find a 335 that was harder to bend that a strat. I sold all my strats because the 335 made my gig life easier. Wish I could help you out in person, I feel like a good setup, a top wrap, and a custom light gauge set would fix this problem.Its not just my 335.
It's everyone that i tried.
Difficult to push the strings.
Sometimes I'll bend them down as well.
Fwiw i have a 2019 SA2200
maybe need to try 9s?