1x12 Cabinet

  • Thread starter Thread starter spedaontherocks
  • Start date Start date
spedaontherocks

spedaontherocks

New member
Does anybody knows a good 1x12 Cabinet for an Einstein?
Wann use it for small stages on weddings and birthday gigs.
Chris
 
I have a 1x12 Engl cab with a V30 and use it with the Einstein - a great combination, if you ask me.
 
dass101":3brevoz3 said:
I use a Suhr CAA 112, don't miss my Mesa 2x12 at all.
Click to expand...

+1 the Suhr 1x12 sounds bigger than most 2X12's it would be a great choice, also the Bogner Cube 1X12 would not be bad.
 
I promise you... gotta try the Bogner 1X12 ported shiva cabinet with a Cl-80 in it. Its unbelievable with the einstein.
 
Rob Tahan":1ck1l5es said:
I promise you... gotta try the Bogner 1X12 ported shiva cabinet with a Cl-80 in it. Its unbelievable with the einstein.
Click to expand...

Sounds good :-)
Just have to check out, where to buy in germany. Chris
 
King Crimson":swlld74d said:
Diezel 1x12 can't get any better than that for Eeinstein - front ported closed back cab.
Click to expand...
I thought these were out of production?

I have tried a Matamp cabinet with a Diezel before. It was a 1x12 with a Celestion Hot 100. It sounded nice, but I think something like the K100 or V30 would be better (the V30 would only work with the Einstein 50).
 
Oooh, maybe they're still available in America. I remember Peter saying that they're not being made here any more. At least I think so. :doh:
 
No worries. :)

I don't know if you remember, but there was a discussion about the posibility of the 1x12 coming back. I think a 1x12 cabinet for the Schmidt would be awesome. Maybe with a Tone Tubby or a V30.

I don't think the dimensions would work, though. If I remember rightly, a Matamp/Orange 1x12 is JUST about big enough to fit a Schmidt (the Schmidt seems to be the same size as the famous Matamp 1224 series). But those cabinets have thicker sides than Diezel, so it might not work.

Interesting possibility, however.
 
Just checked out the Matamp website. Nice!

BONES' Matamp 1224 looks sweet in the gallery section.
 
AngryGoldfish":ghvfh3vz said:
No worries. :)

I don't know if you remember, but there was a discussion about the posibility of the 1x12 coming back. I think a 1x12 cabinet for the Schmidt would be awesome. Maybe with a Tone Tubby or a V30.

I don't think the dimensions would work, though. If I remember rightly, a Matamp/Orange 1x12 is JUST about big enough to fit a Schmidt (the Schmidt seems to be the same size as the famous Matamp 1224 series). But those cabinets have thicker sides than Diezel, so it might not work.

Interesting possibility, however.
Click to expand...

I did play the schmidt with a Diezel 1x12 with a hempcone at http://www.puntke-guitars.de/ and it sounded great - if there's a possibility to get these cabs in the future, I need one.
 
I'd love to get a Diezel 1x12 cab. I'd rather it be a Diezel for dimensions and aesthetic reasons since I've got an Einstein combo. I wonder when, if ever, they'll go into production again..
 
Hey guys, I jumped the gun on the Diezel 1x12 cab. I was contacted by Peter and he said that Diezel Amplification has no 1 by 12 cabinet at this time and will need some time to design a new one.

Bummer! :(
 
King Crimson":1b9rw8cu said:
Hey guys, I jumped the gun on the Diezel 1x12 cab. I was contacted by Peter and he said that Diezel Amplification has no 1 by 12 cabinet at this time and will need some time to design a new one.

Bummer! :(
Click to expand...
Hmm, ah well. At least he's planning on getting one out; gives me time to save some $$. Hopefully designed/in production sooner than later though :D.
 
EVM12L is the solution to all your problems. Put it in the cab of your preference & you are all set. I personally prefer front loaded Mesa Thieles, but if you like less agressive, warmer sound, get something like Bogner Cube or any other ported rear loaded cab & put EVM12L in it.
 
You must log in or register to reply here.
Back
Top