2 Heads Thru 1 Diezel RL-4X12 Cab? Olaf..

[Flavatrocious]

Does anybody know if you can use 2 heads; Diezel VH4/VHT UL thru one Diezel rear loaded 4X12 with V-30's?

 

[supersonic]

Yes, Custom Audio Electronics amp switcher is the best that I'm aware of.

 

[Flavatrocious]

Yes, Custom Audio Electronics amp switcher is the best that I'm aware of.

No i mean 2 heads into 1 cab...

 

[shadowfax29]

Yup Radial Headbone should be what you're after

http://www.music123.com/Radial-Headbone ... 5.Music123

Just make sure you get the right one. They make it in a few different configurations. Make sure you get the one for two tube amps

 

[White_Van]

I thought Diezel cabs were stereo? Can't you run 2 heads through it without a problem? Or am I on drugs?

 

[RedB4Black]

I thought Diezel cabs were stereo? Can't you run 2 heads through it without a problem? Or am I on drugs?

This is the question he is asking. Basically using one head for 2 speakers and the other head with the other 2 speakers in the 4x12 stereo cab. Can this be done.

What ohms matching do you use - assuming a Diezel 4x12 rearloaded stereo cab?

 

[petereanima]

8 ohm output of both amps into the 2x 8 ohm input jacks of the cab.

or do i miss something here?

 

[borkincz]

And ca nI run my VH4 into my Diezel Frontloaded cabinet.. only into a hlaf of it...16 Oms to 16 Ohms left or right side.. I hev 8 ono and 2*16 stereo..I thing i tshould work..or not?.. oe thre must be conected another amp t oteh second stereo input. I thought to use it to crnak the amp in the stuido or at home..useinh 4*12 like 2*12

thanks

 

[White_Van]

If the cab is 16 ohms a side stereo, which I assume it is, you would run the amp from the 2x16 ohm jacks also known as the two 8 ohm jacks.

 

[Flavatrocious]

O.k, please, somebody put this to bed.

 

[Duolos]

Does anybody know if you can use 2 heads; Diezel VH4/VHT UL thru one Diezel rear loaded 4X12 with V-30's?

Yes

 

[RedB4Black]

Does anybody know if you can use 2 heads; Diezel VH4/VHT UL thru one Diezel rear loaded 4X12 with V-30's?

Yes

What are the proper ohms to use on the amp outputs?

 

[petereanima]

8 ohm output of both amps into the 2x 8 ohm input jacks of the cab.

 

[nbarts]

Well if the cab is 8ohm mono & 16ohm stereo then you could run both amps at 16. Think of it like 2 separate 16ohm 2x12s.