Gjeven
New member
Anyone know any music stores that have an Andy Wood model in stock?
Gjeven":25cum1op said:They don't have any in stock, they haven't updated the website.
Gjeven":2d8n9654 said:I looked there, the only thing I think that might be a problem is they are in Canada.
Gjeven":3oxmvbij said:I also found a Modern which has almost everything I would want in terms of options and color. It's pretty close to a guthrie model. The only thing it is made of Alder wood instead of mahogany.
I have a couple of PRS's which are mahogany, and a Musicman BFR which is Alder. I prefer mahogany tone slightly more than alder. So many decisions.
Gjeven":2l5dceix said:Well, I pulled the trigger. It should be delivered by Wed next week.
It is very close to GG specs, but has an alder body, and Aldrich bridge pickup.
danyeo":1cgfme0n said:This place has one that I played the other day. I actually liked the regular modern shape over the shape on the Andy Wood one. And what's up with the setup on these? The strings were basically resting on the frets the action was soo low? This made it sound and feel that the guitar had zero tone. If you buy a new one be prepared to set it up, unless you like extreme low action and basically no tone.
I took a modern in on a trade and same thing, the action was next to nothing. I gave the neck some relief, got those terrible 9 gauge strings off it and gave it a setup and it's got some life to it now. The neck shape is pretty comfy and it sounds decent overall, neck tones are still a bit on the thin side though.
http://goldenageguitars.com/
Tone Zone":34s3yc8u said:danyeo":34s3yc8u said:This place has one that I played the other day. I actually liked the regular modern shape over the shape on the Andy Wood one. And what's up with the setup on these? The strings were basically resting on the frets the action was soo low? This made it sound and feel that the guitar had zero tone. If you buy a new one be prepared to set it up, unless you like extreme low action and basically no tone.
I took a modern in on a trade and same thing, the action was next to nothing. I gave the neck some relief, got those terrible 9 gauge strings off it and gave it a setup and it's got some life to it now. The neck shape is pretty comfy and it sounds decent overall, neck tones are still a bit on the thin side though.
http://goldenageguitars.com/
If you're referring to the neck carve of the Andy Wood Modern, it's actually the same as the regular Modern shape....although the AW has a 16" fingerboard radius, while most regular Moderns come with Suhr's signature compound radius of 10"-14". Also, Moderns (and I think all other Suhrs) come standard with 10's, so the 9's were probably put on by the previous owner. And dude....Moderns come setup with low action....but, there is this thing called climate change that can affect the setup while traveling from the factory to your hands. I've ordered 4 custom Moderns where only 1 out of 4 came with the strings touching the frets and the other 3 just having factory low action. I like it slightly higher myself....but, it's really not that big of a deal....in most cases, a slight truss rod adjustment and it's there. I've had to adjust the setup on many new guitars I've bought, which is something I've come to expect and have no problem with...I think it's a non-issue. Why would anyone expect a guitar to come setup perfectly out of the box, especially considering that everyone's taste can differ? I've noticed that you like to hate on two things in particular....Suhrs and Mesa Mark V's lol.
danyeo":blvnds28 said:The modern I just got is much better after some setup, it's not perfect though. It sounds a LOT better than a Koa standard I had. I owned an S4 that was pretty cool but I never played it next to my Drop Top. I think the prices of the Pro Series are pretty good for what you get. The Andy Wood model did feel different from the Modern I have right now, but 2 outta 3 Suhr's at the dealer had really low action which gives them no margin of error when it comes to climate change, not sure why they set them up that way. All the Anderson's, LSL's, and Tylers at the dealer all felt like they were setup in a similiar way with not too high, not low action. It was kinda funny though playing one Suhr when the notes sounded like a typewriter because of the action. But oh well, a little setup goes a long way.
And don't get me started on the Mark V.
Suhr":559rwk33 said:danyeo":559rwk33 said:The modern I just got is much better after some setup, it's not perfect though. It sounds a LOT better than a Koa standard I had. I owned an S4 that was pretty cool but I never played it next to my Drop Top. I think the prices of the Pro Series are pretty good for what you get. The Andy Wood model did feel different from the Modern I have right now, but 2 outta 3 Suhr's at the dealer had really low action which gives them no margin of error when it comes to climate change, not sure why they set them up that way. All the Anderson's, LSL's, and Tylers at the dealer all felt like they were setup in a similiar way with not too high, not low action. It was kinda funny though playing one Suhr when the notes sounded like a typewriter because of the action. But oh well, a little setup goes a long way.
And don't get me started on the Mark V.
We don't put 009's on we use .010s some dealers take liberties on the setup. Or it could depend on the climate when we built it compared to where it is shipping. It should be pretty easy to bring it in to spec. We have instructions for that on the website and set them up at 1/16" at the last fret t to the string, same as Anderson does as well.