Settings that I used on these recordings are listed below.
Depth - 7:30 (just slightly above being off)
Master Presence - 11:30
Master Volume - varies based on where im playing
Channel 1 (set for a clean tone, no clean mod on this amp yet...I know that this channel has tons of flexibility/possibilities that Im not tapping into but I need a functional clean channel for playing live and this is how I get it)
Volume - Maxed
Presence - 7:30
Treble - 9:30
Mid - 9:30
Bass - 2:00
Gain - around 8:00 (ibasically use the gain as like a second volume/gain, I turn it up enough to get volume out of the channel but I keep it low enough that the channel stays clean...you really have to tweak it )
Channel 2 (distorted tone, Im not a big fan of scooped out distortion, I try to go for a very dark tone that still has alot of clarity and mids that help me cut through in the band mix)
Volume - 10:00
Presence - 1:00 (lots of fine tuning here based on the guitar I use...Duncans for me are warmer than EMG's and usually can take a little more presence without sounding shrill, but there is alot of flexibility and tone to be found in playing with this knob)
Treble - 1:30
Mid - 11:00
Bass 1:00
Gain 1:00
