If you’re just going to use it for recording I’d get the Suhr reactive load w/o the ir loader. You’ll Save a few hundred bucks, plus same tech if you plan on using your own IRs loading then in your daw. I think the best out there is the st rock IR, but unfortunately with the stuff in Ukraine right now it’s unobtainable.
Dont give up on micing your own stuff up. It is difficult to learn and to get it right. But after you do, it’s the best. For me personally I use an sm57 where dust cap meets the cone, half on the cone half on the dust cap. Run the amp LOUD. Then into my universal audio Apollo, I use unison running the Neve pre amp, and it sounds absolutely killer. Other thing that can hamper you is having a crappy reamp box if you’re going that right. For good cheap reamp boxes the signal art stuff works pretty great.