Anyone knows a good and cheap midi-looper?

[DvE]

Hey all,

I use a maxon od808 in front of my herbert and bought a g-lab 2x midi-looper to have
- true bypass and
- make several settings with and without the od.

My problem: The g-lab cannot store settings. It has fixed configuration when which loop is active.
If it were configurable/storable, it would be exactly what I need. Not many loops, cheap and true bypass.

Any advices?

 

[BERNI]

try this...
http://www.loopersparadise.de/en/prod.php?p=186

luck

 

[DvE]

Thanks for the tipp

Any other suggestions? If I can find one with 2 loops, this would be enough (and hopefully cheaper) ;-)

Edit: I think I will check out this one: https://www.thomann.de/de/lehle_dloop_sgos.htm
looks like what I need =)

 

[moltenmetalburn]

http://payne-labs.com/joomla/index.php? ... &Itemid=34

@$219.95 USD

 

[slyvren]

http://payne-labs.com/joomla/index.php?option=com_content&view=article&id=22&Itemid=34

@$219.95 USD

+1 this thing rocks. It's the center of both my einey and vh4 rigs.

 

[eddiespaghetty]

Thanks for the tipp

Any other suggestions? If I can find one with 2 loops, this would be enough (and hopefully cheaper) ;-)

Edit: I think I will check out this one: https://www.thomann.de/de/lehle_dloop_sgos.htm
looks like what I need =)

Lehle D-Loop is a bit expensive, but best quality (lots of pros are using Lehle), I have one too, you can't go wrong. I also use a Vermona Loop Jack (loopersparadise.de), very good, but Lehle is better. I heard good things of payne-labs (K-Switch) as well.

Best
Helmut

 

[DvE]

Thanks for the comparison =)

I think I will go for the Lehle.

 

[DvE]

Hey,

I bought the Lehle and it works nicely, but I have problems with the midi-stuff.

Do I have to set anything special on the herbert to use Herberts midi send?