E
ewill52
Well-known member
Just curious about who has done it and what kind of results? Would be amazing to have the ability to take out an AC30, Plexi, and BE in the same rig, curious how it cuts in the mix?
LP Freak":u7jw8tko said:I use mine live and run it direct to the FOH and monitor it through an Atomic CLR. I mostly use a BE profile and have zero issues cutting through the mix.
sahlomonic":1ei39llq said:Jeff Loomis and Keith Merrow use them live with their band Conquering Dystopia. From the crowd it sounds just as good as analog tube amps IMO.
PBGas":uxsbcjbk said:I use mine live regularly. I have a powered rack that I run into a Marshall 1960AX with greenbacks for my stage monitoring because I still love the sound through a regular guitar speaker and I take one of the main outs to board to FOH.
It should absolutely stellar! My setup time is about 1:00minute total with my FCB1010. 2 midi cables and a power supply. I run it through the performance mode where I setup banks for songs and I have minimal tap-dancing to do.
love the setup! I've not had a better live tone.
![]()
guitarmike":1ues0hby said:Back in the day, when you bought an album (yes, vinyl), you would copy it to a cassette so you could play it in your car. The tape was never quite as good as the album but it was good enough. That is how to approach a Kemper..
PBGas":5jnv7rvq said:I was using a powered rack version back in May-June and through the summer. Unfortunately that unit went poof on me and I returned it for the regular rack unit. I was always running a 2x12 or 4x12 cab. I borrowed a friends CLR back in August and haven't looked back. I was really missing the sounds of the cabs through this type of monitoring system. It took me a bit to get used to it but now, I'm really happy with what I hear. I've been trying some different FRFR units to see what I like best. The CLR costs way too much for me to import up here so I'd rather try something that I can get locally.
That being said, i start a 10 evening gig in mid-Dec. I'm only bringing my Kemper and a borrowed FCB footboard with the Uno chip. Thus far, my direct to house tones have been outstanding! I had great luck with the Torpedo Live with an amp head as well in the past but this box takes literally no time to setup and works great for all of my live and home recording needs.
stratotone":5jnv7rvq said:Used a Kemper for nearly 3 years live, haven't missed a tube amp for performing since. Depends on the quality of profiles you use and if you run most of your volume through the PA or not. If you're playing small venues where you just crank a half stack and don't exist very loudly in the PA, you may not like it. I'm much happier with my FOH sound with the Kemper than I was with *ANY* Tube amps I used live, after they were quickly miked and put through the PA.
Pete
JerEvil":d8kpqi8t said:Can you run the cab sim to FOG but disable if using an actual guitar cab? I am thinking about going from Eleven Rack to a Kemper and using a nice 1x12 and ISP Stealth for power. I suppose having the cab emulation on coming to the 1x12 isn't THAT big a deal.
Also how are the CLR's vs. something like the Matrix NL212
I have an Alto powered 10" I am using with my Eleven. Nice, light and sounds good for stage reference.smdb":3jwd5qum said:JerEvil":3jwd5qum said:Can you run the cab sim to FOG but disable if using an actual guitar cab? I am thinking about going from Eleven Rack to a Kemper and using a nice 1x12 and ISP Stealth for power. I suppose having the cab emulation on coming to the 1x12 isn't THAT big a deal.
Also how are the CLR's vs. something like the Matrix NL212
I use the Yamaha DXR10 and it works pretty well. I have used the power amp and cab method as well, but I was still lugging way too much gear and just opted for the compact rig with a powered speaker. It works well, sometimes I don't even use my speaker at certain venues. FOH and stage monitors or IEM and I am good to go.