Can I phantom power my Rocktron All Access with a Patchmate?

  • Thread starter Thread starter musemark
  • Start date Start date
musemark

musemark

New member
21082010055.jpg


I have just got an early Rocktron Patchmate Hush but no original power supply for it, it says in the manual it is 9V AC and needs about 1150ma.

I have a Rocktron All Access with an Rocktron 2000ma power supply, will that be enough to power them both by plugging it into the Patchmate and getting a 7 pin lead to run to the All Access?

Any help would be appreciated :)
 
The All Access brick should be enough to power both of them. The AA only draws like 250mA or something ridiculously low.
 
I use one of those old Patchmates as well - I love those units. Way better than the newer model, IMHO.

The rear panel of the Patchmate has two female adaptor jacks: one for powering the Patchmate itself and one for powering the midi pedal through the 7-pin connector. In summary, you do need to plug two separate adaptors into the back of the unit to power it up and phantom power your pedal.

Code's comment on the AA's mA rating still holds true though.

Good luck! :rock:
 
You must log in or register to reply here.
Back
Top