I
ibzprestige
Active member
For sale is a guitar I threw together with an MJT/USACG San Dimas style body with dual humbuckers and non-recessed Floyd route with a Daphne Blue Nitro Relic finish, neck is a Warmoth Modern Construction with 1 5/8" nut width, standard thin profile, satin nitro finish, Grover tuner holes, and a 10-16" radius, 6105 frets as well. Humbuckers are Duncan 59/custom hybrid in bridge and whole lotta humbucker in neck. Non fine tuner Floyd rose in chrome with a light relic to its, pretty much just scuffed with a scotch brite pad, and a brass big block. Schaller style strap buttons. Dimarzio cream pickup rings and a gotoh relic knob and neck plate. CTS 500k pot and switchcraft Jack and Toggle, gotoh mini tuners. I don't have back plates.
Now some find details. There is a chip in the paint and a little wood near the volume knob, and in the control cavity for the toggle switch and bridge wire hole(see pics). The neck as a slight gap in the neck pocket, everything lines up and I have seen guitars like this so I guess it's normal. The Jack plate is a little crooked. The Floyd r2 nut is a little more narrow than the actual neck mounting point, I have seen this on Charvels as well, so it is normal. I accidentally drilled an extra hole under the string tree, but it is covered when it is installed. The tuners are not screwed into the wood or drilled, so you could actually install any tuners you'd want. The Floyd since it has the spin on arm and coupler rubs on the trem cavity a little bit, so that can be fixed with the modern style arm and coupler or sanding a bit of the wood away. Other than that, it plays pretty nicely and sounds great, would also be great to use the parts on other guitar builds. I am selling this as parts and not a completed guitar as I do not have a case so it will ship half and half. The body is lightweight basswood and the neck is premium flamed maple 2 piece.
Price for everything is $930 shipped plus PayPal.
if you want either half the body with Floyd and pickups, electronics, etc. would be $520 shipped plus PayPal and the neck including tuners and neck plate $420 plus payPal
Now some find details. There is a chip in the paint and a little wood near the volume knob, and in the control cavity for the toggle switch and bridge wire hole(see pics). The neck as a slight gap in the neck pocket, everything lines up and I have seen guitars like this so I guess it's normal. The Jack plate is a little crooked. The Floyd r2 nut is a little more narrow than the actual neck mounting point, I have seen this on Charvels as well, so it is normal. I accidentally drilled an extra hole under the string tree, but it is covered when it is installed. The tuners are not screwed into the wood or drilled, so you could actually install any tuners you'd want. The Floyd since it has the spin on arm and coupler rubs on the trem cavity a little bit, so that can be fixed with the modern style arm and coupler or sanding a bit of the wood away. Other than that, it plays pretty nicely and sounds great, would also be great to use the parts on other guitar builds. I am selling this as parts and not a completed guitar as I do not have a case so it will ship half and half. The body is lightweight basswood and the neck is premium flamed maple 2 piece.
Price for everything is $930 shipped plus PayPal.
if you want either half the body with Floyd and pickups, electronics, etc. would be $520 shipped plus PayPal and the neck including tuners and neck plate $420 plus payPal