Diezel Einstein Fuses Blown

  • Thread starter Thread starter Loghan
  • Start date Start date
Loghan

Loghan

New member
Hi all.

This is the second time the fuse from the outer power tubes pair and the mains fuse have been blown in my Diezel Einstein Head 100W in a week.

So my question is should i replace power tubes and my problem will be solved or should i check anything else?

Cheers. Thanks in advance. :thumbsup:
 
Replace tubes and fuses, rebias and you'll be done.
 
Sometimes the sockets get loose from the different sized tube pins. If they clamps are loose in the
socket and the amp is on a cabinet, the rattle can cause one of the tube pins to lose contact and short out
the fuse. You can tighten them up with a tiny screw driver or dental pick.
 
Back
Top