Pearly Gates
Member
What do you think?
What do you think?
D
Daniel.S
Member
Sounds pretty good!Diezel123":3f3ueuhr said:
What do you think?
Reduce the Master and increase the channel volume to about 1 o'clock and reduce the Gain to about 12 o'clock. Crank the Mids to 10.
Try it without the Boss in the front if you don't like it without, then add it later
badgergman
Member
Amp appears to be on standby?
H
hopkinWFG
Well-known member
Nice nice tones !!! Are you playing thru a superstrat or an LP ?
Pearly Gates
Member
..
djpatb
Member
Channel 1, mode 3?
D
Daniel.S
Member
Of coursedjpatb":3gk8v1g3 said:
P
Philhouse
Well-known member
Sounds good man. You've got the riffs well in hand. \m/
Next layer in some Jones vibe with the Delay, Flanger and a smidge of reverb (so it's not quite so AJFA dry), then spiral out.
Next layer in some Jones vibe with the Delay, Flanger and a smidge of reverb (so it's not quite so AJFA dry), then spiral out.
N
nightwatcher
New member
Diezel123":lcdgg4gs said:
What do you think?
Sounds good! What IR setting did you use in Wall of Sound? Share, please
Pearly Gates
Member
nightwatcher":1wjyksq3 said:Diezel123":1wjyksq3 said:
What do you think?
Sounds good! What IR setting did you use in Wall of Sound? Share, please
You're asking me to give away my secrets??
Jks.. I can't remember specifically but I remember I used 4 cabs.
One side was either Britvinc and brownyback/bogreen
The other was RectooverOS and brownyback/bogreen
I think I messed up some of the names there. Can't remember if I used 2x brownybacks or 2x bogreens or 1 of each.
I think all would have been 57 mics except the recto cab which had a condenser. Probably put a high pass filter on the recto & britvinc around 100-120hz. Probably a touch of "studio a" or "studio b" reverb 15-20%. I don't think I touched any of the mic positioning settings or anything like that.