Diezel Midi and Strymon pedals

  • Thread starter Thread starter Fox77
  • Start date Start date
Fox77

Fox77

Member
Hi guys,

Just a quick question: would the Columbus allow me to program the Hagen together with for instance a Strymon Timeline to create patches? I.e. switching from a channel 1 with one delay to channel 4 with a different delay?

There have been similar threads before but I did not find the answer I was looking for.

Thanks :rock:
 
It is possible to do that. Just connect the Columbus to the Hagen midi in and then connect Hagen midi-thru to the Strymon midi-in. Then it is very simple, for example: select the patch number 1 on the Columbus, switch to the desired channel on the Hagen with loop on, press the store button /on the Hagen/, set-up your delay time on the strymon pedal and also save it. Then select patch number 2 on the Columbus and repeat this process for another channel and different delay time. It is just the same thing as with most multi-effect rack units /for example G-major..../.

Peter
 
You must log in or register to reply here.
Back
Top