DIY pedal for Einstein mod ?

[Soizic77]

Hello,

I've just bought a 50W Einstein head
I read the post for the "mode mod" entitled "Unofficial Einstein Channel 1 Modes Mod + New DIY Pedal".
I'm ok for the modification inside the head... all understood !
I only have doubts for the pedal because all the images and schematics for the DIY footswitch in the topic have been deleted...

Can someone post them again please !!!????

If I decide not to make the DIY footswitch, can I use an "standard" 3 button footswitch, dedicated to the 3 modes of channel 1 like this one ??? http://www.banzaimusic.com/Footswitch-box-three-button-LED.html

Thanks a lot for your answers !!!

 

[duesentrieb]

http://www.krampeamplification.com/Kram ... /fssch.pdf

MJ1 to +9V
MJ5 to ground of jack and - of 9V
MJ2 to tip of stereo jack
MJ3 to ring of stereo jack

That Banzai thing won't work . . .

 

[Soizic77]

OK thanks for your answer !

You say the Banzai standard footswitch won't work...
Do you know 1 "standard" pedal I could buy that would do the job ? (other than the "tubelit" one at 300€ !!!)
Which specifications must it have to work correctly ???

DIY is a lot of time and patience... and courage !

 

[duesentrieb]

I can build you one, PM me . . .

 

[Schoenbrau]

I can build you one, PM me . . .

Hi, are you still open to building footswitches for modded Einsteins?