does NOBODY make a full pocket brass neck shim for a guitar?!?

reignman454

reignman454

Active member
Seriously, you would think that's a no brainer.... Can't believe that I'm missing it but the stew mac tapered ones are meh.
 
  • Haha
Reactions: rsm
griff10672 said:
brass ?? I've always used the wood ones from Stew Mac ....
Click to expand...
Back in the day, there was a "luthier to the stars" named Rod Schoepfer... had a shop for a while. Long story short he custom made brass inserts and the tone was to DIE for. Many of samboras main axes were done by him with parts from Neptune (Kramer).

He also built Ritchies famous non les paul with the Kahler.

The stew mac ones are good but honestly, they're not the best at transmitting vibration, tone etc. Ended up using some of those I had in a pinch.
 

Attachments

  • e9358a0e9752dc2b158dbead18c1280a.jpg
    e9358a0e9752dc2b158dbead18c1280a.jpg
    22.9 KB · Views: 31
It seems like manufacturing angled brass shims would be difficult/expensive and fitting them would be a whole nuther adventure. The Stew Mac angled shims are easy on both counts (altho the 1/4 degree ones are easily split).

It seems I need a reverse shim (to bring the strings closer to body) as often as I need a regular shim and that requires a lot of custom fitting because AFAIK they only make pre-shaped angled shims for raising the strings off of the body. Some of these partscaster parts put the strings too high off of the body so a reverse shim is needed to make the guitar feel right and not have the saddles at max height.
 
SpiderWars said:
It seems like manufacturing angled brass shims would be difficult/expensive and fitting them would be a whole nuther adventure. The Stew Mac angled shims are easy on both counts (altho the 1/4 degree ones are easily split).

It seems I need a reverse shim (to bring the strings closer to body) as often as I need a regular shim and that requires a lot of custom fitting because AFAIK they only make pre-shaped angled shims for raising the strings off of the body. Some of these partscaster parts put the strings too high off of the body so a reverse shim is needed to make the guitar feel right and not have the saddles at max height.
Click to expand...
I had to do this on my Partscaster! I got the shim set from SM, as I was not sure which one I needed, flipped it around and it worked like a charm. The one I needed was super thin. I wanted something will full coverage. Guitar sounds great and resonates fine. You definitely nailed the exact reason I needed them.
 
Brass sounds amazing. I have various brass replacement parts (locking nuts, saddle inserts, big blocks and even a complete Tune o matic bridge/tailpiece set) implemented across a few guitars. There's a well earned reputation of brass being called a "musical metal". It's just very rich sounding and pronounced in the upper mids without being spikey.
 
GuitarGuy08 said:
I had to do this on my Partscaster! I got the shim set from SM, as I was not sure which one I needed, flipped it around and it worked like a charm. The one I needed was super thin. I wanted something will full coverage. Guitar sounds great and resonates fine. You definitely nailed the exact reason I needed them.
Click to expand...
Yep it does work but if you think about it, a shim raises the neck off the body when we wanted the strings closer to the body. So thin angled shims work here but if you start putting thick reverse shims in there it doesn't really work that well.
 
SpiderWars said:
It seems like manufacturing angled brass shims would be difficult/expensive and fitting them would be a whole nuther adventure. The Stew Mac angled shims are easy on both counts (altho the 1/4 degree ones are easily split).

It seems I need a reverse shim (to bring the strings closer to body) as often as I need a regular shim and that requires a lot of custom fitting because AFAIK they only make pre-shaped angled shims for raising the strings off of the body. Some of these partscaster parts put the strings too high off of the body so a reverse shim is needed to make the guitar feel right and not have the saddles at max height.
Click to expand...
the "China bombs" on amazon have flat .25.50.1.00 graduations
 
thegame said:
Brass sounds amazing. I have various brass replacement parts (locking nuts, saddle inserts, big blocks and even a complete Tune o matic bridge/tailpiece set) implemented across a few guitars. There's a well earned reputation of brass being called a "musical metal". It's just very rich sounding and pronounced in the upper mids without being spikey.
Click to expand...
Fat pro 42mm Floyd block alone made the natural harmonics just sing on this one.... Sometimes they honestly make them too fat and boomy
 
Why not use a full size piece? It would be easy to make. Then drill for the mounting screws. Or am I missing something obvious?
Edit- my question was in reference to the above picture with the small piece of brass.
 
VH1R2 said:
I could make you one, just give dimension and shim thickness, I'll make you some.
Click to expand...
This is something I would be seriously interested in for my partscaster. The smallest shim I used from SM has cracked, but it still doing the thing well enough overall. I would prefer brass 1000%.
 
You must log in or register to reply here.
Back
Top