Egnater Channel Switching?

  • Thread starter Thread starter CGB89
  • Start date Start date
CGB89

CGB89

New member
I've been wondering, is there any way you can have individual channels from your Egnater as patches on a Voodoo Lab Ground Control? I know you can with Mesa's and Diezels, because the channels have individual outputs, but can you do this with Egnaters? Or is there a mod you can do for this?
 
Which amp? For the mod series (or M4), you would setup the Egnater as a device in GCP and connect them via midi. The GCP would send a program change to the Egnater and switch the channels. Works great.
 
Renegade, NO. It doesn't have a MIDI set up. You could mod it to support MIDI and then do it though.
 
Sorry, I don't understand your original question. Are you asking for individual audio outputs from each channel or are you referring to something to do with the channel switching?
 
I was asking if there was a way to assign each individual channel to a patch on a Ground Control Pro or similar patch device instead of A/B switching between the clean and gain.
 
What would be the point of doing this? I think it would be a major modification to do this through MIDI on the Renegade so I would be hesitant. What capability would this give you that you don't already have?
 
You can do it with the Ground Control AND the Control Switcher (GCX?).
 
I just wanted to see if I could biamp the two and be able to switch channels on the GCX so I wouldn't have two footswitches on the floor.
 
CGB89":2lbj2jxx said:
I just wanted to see if I could biamp the two and be able to switch channels on the GCX so I wouldn't have two footswitches on the floor.
Click to expand...

I'm not sure what you mean by "biamp". You mean using both at the same time?
I don't think the GCX will do that. You'd need to select the amp, but the GCX can switch channels.
 
Ok. My next question is, is the Vengeance just a 2-channel version of the Armageddon without the Decimator? Because I love how the Armageddon sounds, but I think the two channel Vengeance would be better compatible with the Renegade, since it also has two channels. If I'm making any sense. Like, clean + clean and dirty + dirty, instead of clean + clean, dirty + dirty 1, and dirty + dirty 2. I'm trying to word this in a way that's not confusing. I'm not too good at explaining things online. :/
 
You must log in or register to reply here.
Back
Top