Einstein 100 W -> 50 W

[jswevers]

Dear All,


Today I played my Einstein 100 W for the first time and it has a increadible sound ... like ch 1 (modes 1 and 3) and ch 2 the most.
Besides this it is very loud, considering the small room I am playing
in. So maybe I have to switch it to 50 W by removing two power tubes.
I use it with a Diezel rearloaded V30 4x12 cab (8 Ohm mono input).

This is what I found on this forum, and I post it here such that those
who know what to do (certainly Peter D and Olaf and probably others)
can check that it is correct:

- remove 2 power tubes (outer or inner), that is leave tube 1&4 or 2*3
- plug the cab (8 Ohm) into one of the two 4 Ohm speaker outputs
- leave the fuses as they are (did not foud anyting about that, but
i can imagine that this is ok)

Can somebody give me feedback on this?

Thanks

Jan

 

[Peter Diezel]

"- remove 2 power tubes (outer or inner), that is leave tube 1&4 or 2*3
- plug the cab (8 Ohm) into one of the two 4 Ohm speaker outputs"


Correct

But You will have no big difference.