Einstein bias procedure?

  • Thread starter Thread starter moltenmetalburn
  • Start date Start date
moltenmetalburn

moltenmetalburn

Active member
I have external test points but its been a few years since i used them, cant find my documentation and its gone from the web site.

Someone remind me how to do it!
:doh:
 
red probe -> red receptacle - black probe -> black receptacle. all volumes turned down.. amp hooked to load.. turn amp on -> pull fuse of the pair you're biasing.. (inner or outer) set multimeter to 200mA. amp out of standby turn screw on screwhole to adjust bias to ~65mA then amp standby.. replace fuse, repeat for other pair.
 
slyvren":2fqy5il8 said:
red probe -> red receptacle - black probe -> black receptacle. all volumes turned down.. amp hooked to load.. turn amp on -> pull fuse of the pair you're biasing.. (inner or outer) set multimeter to 200mA. amp out of standby turn screw on screwhole to adjust bias to ~65mA then amp standby.. replace fuse, repeat for other pair.
Click to expand...


Thanks so much, sounds devastating!
:rock:
 
You must log in or register to reply here.
Back
Top