D
Deleted member 7586
Guest
I sent this to diezelusa@yahoo.com a few days ago and haven't heard back yet. I'm not being impatient or anything, but I need to get this figured out as soon as possible. This Einstein is my main gigging amp. Can you guys help?
--------------------
I have an Einstein that I believe was made in November 2008. I've recently started experiencing an issue. I've done tons of troubleshooting to narrow down the issue, but now I'm not sure what else to try. I've tried different guitars, different cables, preamp tubes, speaker cables, speaker cabs, etc... The only thing I haven't tried are different power tubes, but I don't see how power tubes going bad could cause this issue. I don't think they're the problem.
What happens is that the amount of gain on the amp increases two or three times and the amp squeels like a pig when I roll up my guitar volume. I've noticed that most of the time if I pull the guitar cable out of the amp, then plug it back it, the amp seems to correct itself.
When it's in this super high gain squeel mode, I can tap on ANY preamp tube and it sounds like they're all microphonic. Heck, even tapping on the chassis itself sounds microphonic. But when the amp isn't experiencing this problem, the preamp tubes don't sound microphonic. I've swapped them several times and that didn't fix the issue.
I just noticed today that when the amp is doing this super high gain squeel stuff, I rolled the preamp gain on Channel 2 all the way off and there was still sound coming out of the guitar/amp. It almost seems like it's chaining both channels together or something when this problem happens. It's happened several times to me now over the past month. I can pretty much count on it happening at least one time anytime I play the amp, which unfortunately, has included gigs.
I think there's something in the preamp going out on it (or maybe the input jack, channel select switch, etc...?)
I'm in the middle of the USA. Are there any Diezel repair centers around here or how would I get something like this fixed? Will I need to ship it somewhere for the repair? I still have the original box and stuff, so I'm good there. I just need to get this fixed and I think I've ruled out everything external to the amp. I'm pretty sure it's an issue with the amp itself.
Any help is appreciated.
--------------------
I have an Einstein that I believe was made in November 2008. I've recently started experiencing an issue. I've done tons of troubleshooting to narrow down the issue, but now I'm not sure what else to try. I've tried different guitars, different cables, preamp tubes, speaker cables, speaker cabs, etc... The only thing I haven't tried are different power tubes, but I don't see how power tubes going bad could cause this issue. I don't think they're the problem.
What happens is that the amount of gain on the amp increases two or three times and the amp squeels like a pig when I roll up my guitar volume. I've noticed that most of the time if I pull the guitar cable out of the amp, then plug it back it, the amp seems to correct itself.
When it's in this super high gain squeel mode, I can tap on ANY preamp tube and it sounds like they're all microphonic. Heck, even tapping on the chassis itself sounds microphonic. But when the amp isn't experiencing this problem, the preamp tubes don't sound microphonic. I've swapped them several times and that didn't fix the issue.
I just noticed today that when the amp is doing this super high gain squeel stuff, I rolled the preamp gain on Channel 2 all the way off and there was still sound coming out of the guitar/amp. It almost seems like it's chaining both channels together or something when this problem happens. It's happened several times to me now over the past month. I can pretty much count on it happening at least one time anytime I play the amp, which unfortunately, has included gigs.
I think there's something in the preamp going out on it (or maybe the input jack, channel select switch, etc...?)
I'm in the middle of the USA. Are there any Diezel repair centers around here or how would I get something like this fixed? Will I need to ship it somewhere for the repair? I still have the original box and stuff, so I'm good there. I just need to get this fixed and I think I've ruled out everything external to the amp. I'm pretty sure it's an issue with the amp itself.
Any help is appreciated.