Digital Jams
New member
IF you have an EMU they have the Vista drivers available for download.
E-MU PatchMix DSP Version V2.00 Feature Enhancements:
The PatchMix application and driver are now Windows Vista compatible. (Note: PowerFX and E-Wire are not supported under Vista)
PatchMix input strips can now be either mono or stereo. Example: The microphone inputs can be configured as a stereo strip and stereo pair line inputs can be configured as mono channels.
TV Screen now defaults to Outputs button on PatchMix load / creating new sessions
Added support for 1616 PCI, 1616M PCI
Added Wave outputs 5/6 and 7/8 to 0404 PCI. New Core Effects: (Note: requires 2.00 driver)
RFX Compressor - a full-featured compressor with soft-knee, sidechain, noise gate, negative compression and more
Reshaper Effect - allows you to completely reshape the dynamics of a sound.
Gate - a stereo noise gate for background noise reduction and special effects
Multimode EQ - a flexible stereo filter capable of implementing a variety of filter topologies
Fixes:
Fixed a bug where ASIO Direct Monitor Insert was not saved with session.
Fixed a bug where Cubase SX3 did not show EmuPowerFX parameter names in automation track.
Fixed a bug where PowerFX failed without an error message when no ASIO channels were available.
Fixed a bug where Ableton Live displayed PowerFX parameters as "unmapped" until slider was adjusted.
Fixed a bug where PowerFX settings were lost when moving the plug-in from one track's FX bus to another in Sonar 3.
Fixed a bug where the MIDI Tab in PatchMix didn't show when Sync Card and Dock were both attached.
Fixed a bug where PatchMix freezes after a sample rate change of another application.
Fixed a Sync Card bug where LTC to MTC conversion wasn't active until the Sync Control panel was opened.
Drivers,
After you install:
1616 and 1616M Users: Immediately after installing this upgrade, please be sure to turn the MicroDock off and then back on again, in order for the new firmware to take effect
Driver Package V2.00 contains the following feature enhancements and fixes:
Driver Version# 6.0.1.124
Feature Enhancements:
Added Windows Vista support
Added support for 1616 PCI, 1616M PCI
Added new Core effects (see PatchMix 2.00 app notes for details)
Fixes:
Fixed bug where Local Control Off (CC 122 OFF) MIDI message was sent to the MIDI port when a MIDI application terminates.
Includes changes from V1.82 Release
Firmware Version# 3.4 (For E-MU 1212M, 1820, 1820M, Emulator® X)
Includes changes from V1.02 Release
Firmware Version# 4.2 (For E-MU 1616, 1616M)
Fixes:
Includes changes from V1.81 Release
Windows Driver Signature
When you install the Digital Audio System drivers, you will see a dialog box informing you either that the driver has not been certified by Windows Hardware Quality Labs (WHQL), or that the driver is signed by Creative Labs, Inc, and you will be asked if you would like to continue with the installation.
The Digital Audio System audio drivers are not certified by WHQL because the product does not support some of the features that the Microsoft Windows Logo Program requires, most notably Universal Audio Architecture (UAA) and Digital Rights Management (DRM).
Despite this, the Digital Audio System audio drivers have been rigorously tested using the same test procedures that a WHQL qualified driver requires, and it passes in all of the other important categories, including those that measure the relative stability of the driver. So, it is perfectly safe to install these drivers on your computer.
E-MU PatchMix DSP Version V2.00 Feature Enhancements:
The PatchMix application and driver are now Windows Vista compatible. (Note: PowerFX and E-Wire are not supported under Vista)
PatchMix input strips can now be either mono or stereo. Example: The microphone inputs can be configured as a stereo strip and stereo pair line inputs can be configured as mono channels.
TV Screen now defaults to Outputs button on PatchMix load / creating new sessions
Added support for 1616 PCI, 1616M PCI
Added Wave outputs 5/6 and 7/8 to 0404 PCI. New Core Effects: (Note: requires 2.00 driver)
RFX Compressor - a full-featured compressor with soft-knee, sidechain, noise gate, negative compression and more
Reshaper Effect - allows you to completely reshape the dynamics of a sound.
Gate - a stereo noise gate for background noise reduction and special effects
Multimode EQ - a flexible stereo filter capable of implementing a variety of filter topologies
Fixes:
Fixed a bug where ASIO Direct Monitor Insert was not saved with session.
Fixed a bug where Cubase SX3 did not show EmuPowerFX parameter names in automation track.
Fixed a bug where PowerFX failed without an error message when no ASIO channels were available.
Fixed a bug where Ableton Live displayed PowerFX parameters as "unmapped" until slider was adjusted.
Fixed a bug where PowerFX settings were lost when moving the plug-in from one track's FX bus to another in Sonar 3.
Fixed a bug where the MIDI Tab in PatchMix didn't show when Sync Card and Dock were both attached.
Fixed a bug where PatchMix freezes after a sample rate change of another application.
Fixed a Sync Card bug where LTC to MTC conversion wasn't active until the Sync Control panel was opened.
Drivers,
After you install:
1616 and 1616M Users: Immediately after installing this upgrade, please be sure to turn the MicroDock off and then back on again, in order for the new firmware to take effect
Driver Package V2.00 contains the following feature enhancements and fixes:
Driver Version# 6.0.1.124
Feature Enhancements:
Added Windows Vista support
Added support for 1616 PCI, 1616M PCI
Added new Core effects (see PatchMix 2.00 app notes for details)
Fixes:
Fixed bug where Local Control Off (CC 122 OFF) MIDI message was sent to the MIDI port when a MIDI application terminates.
Includes changes from V1.82 Release
Firmware Version# 3.4 (For E-MU 1212M, 1820, 1820M, Emulator® X)
Includes changes from V1.02 Release
Firmware Version# 4.2 (For E-MU 1616, 1616M)
Fixes:
Includes changes from V1.81 Release
Windows Driver Signature
When you install the Digital Audio System drivers, you will see a dialog box informing you either that the driver has not been certified by Windows Hardware Quality Labs (WHQL), or that the driver is signed by Creative Labs, Inc, and you will be asked if you would like to continue with the installation.
The Digital Audio System audio drivers are not certified by WHQL because the product does not support some of the features that the Microsoft Windows Logo Program requires, most notably Universal Audio Architecture (UAA) and Digital Rights Management (DRM).
Despite this, the Digital Audio System audio drivers have been rigorously tested using the same test procedures that a WHQL qualified driver requires, and it passes in all of the other important categories, including those that measure the relative stability of the driver. So, it is perfectly safe to install these drivers on your computer.
