N
nothing_ro
New member
Up for sale the best amp for the famous brown tone (and not only!) - for only 2100$ + shipping.
The amp is located in Europe - but i can ship it to US too.
Plug your guitar in and you’ll have all the tones that a 50W Marshall Plexi amp could deliver + hot rodded Plexi tones.
Being the deluxe version it has 2 footswitchable wife knobs (Bray’s version of master volume) - so you could play from bedroom volumes to rehersal room volume to maximum loudness!
The amp is made in 2013 but it was well cared so it’s MINT!
The amp is really a superior version of the famed vintage British 50 watt plexi!
The Standard Bray 4550 includes:
-Completely hand-wired, hand-soldered Point-To-Point turret board and components
-Precision tight-wound tube filament wiring design to eliminate AC filament hum
-Bray spec'd custom-wound transformers by Heyboer
-Gold color 16 gauge zinc-plated steel chassis
-3 ECC83 preamp tubes, 2 EL34 output tubes, 1 GZ34 rectifier tube
-3-way Standby Switch lets you choose between Tube and Solid State Rectifier, and is Bias-Compensated
-Output Level “Wife Knob” control lets you dial down the volume to whisper levels without losing gain or overdrive
-Plexi Style Channel 1 Bright and Channel 2 Dark channels allow you to mix each one into your sound how you want without the use of a separate jumper cable
-Plus Mode places the channels from parallel into series (as well as a few tonal changes), allowing even higher gain sounds.
The Bray 4550 Deluxe also includes the following:
-Dual Output Level “Wife Knobs” and included LED footswitch allows switching to a louder volume level for solos, as well as keeping your volume level loud when turning down your guitar's volume level for a clean sound
-Harmonic Switch push/pull switch added to the Treble Control, adding harmonics and upper mids when pulled out. I enjoy this with guitars that have somewhat scooped pickups such as vintage PAF styles.
-Vintage/Hot Switch push/pull switch added to the Midrange Control, allowing a slightly more aggressive tone when pulled out, and a mellower sound when pushed in. Useful when in Plus Mode, push it in to take a slight edge off, as well as for very clean sounds.
-Channel 1 Bright Switch added to the Channel 1 Volume Control, adding high frequencies when pulled out. Although bypassed when the volume control is all the way up, it is useful for Classic Rock sounds when the Channel 1 Volume is set around 6. Pulled out, it adds just a bit of “clang” to bring you out of the mix.
The amp is located in Europe - but i can ship it to US too.
Plug your guitar in and you’ll have all the tones that a 50W Marshall Plexi amp could deliver + hot rodded Plexi tones.
Being the deluxe version it has 2 footswitchable wife knobs (Bray’s version of master volume) - so you could play from bedroom volumes to rehersal room volume to maximum loudness!
The amp is made in 2013 but it was well cared so it’s MINT!
The amp is really a superior version of the famed vintage British 50 watt plexi!
The Standard Bray 4550 includes:
-Completely hand-wired, hand-soldered Point-To-Point turret board and components
-Precision tight-wound tube filament wiring design to eliminate AC filament hum
-Bray spec'd custom-wound transformers by Heyboer
-Gold color 16 gauge zinc-plated steel chassis
-3 ECC83 preamp tubes, 2 EL34 output tubes, 1 GZ34 rectifier tube
-3-way Standby Switch lets you choose between Tube and Solid State Rectifier, and is Bias-Compensated
-Output Level “Wife Knob” control lets you dial down the volume to whisper levels without losing gain or overdrive
-Plexi Style Channel 1 Bright and Channel 2 Dark channels allow you to mix each one into your sound how you want without the use of a separate jumper cable
-Plus Mode places the channels from parallel into series (as well as a few tonal changes), allowing even higher gain sounds.
The Bray 4550 Deluxe also includes the following:
-Dual Output Level “Wife Knobs” and included LED footswitch allows switching to a louder volume level for solos, as well as keeping your volume level loud when turning down your guitar's volume level for a clean sound
-Harmonic Switch push/pull switch added to the Treble Control, adding harmonics and upper mids when pulled out. I enjoy this with guitars that have somewhat scooped pickups such as vintage PAF styles.
-Vintage/Hot Switch push/pull switch added to the Midrange Control, allowing a slightly more aggressive tone when pulled out, and a mellower sound when pushed in. Useful when in Plus Mode, push it in to take a slight edge off, as well as for very clean sounds.
-Channel 1 Bright Switch added to the Channel 1 Volume Control, adding high frequencies when pulled out. Although bypassed when the volume control is all the way up, it is useful for Classic Rock sounds when the Channel 1 Volume is set around 6. Pulled out, it adds just a bit of “clang” to bring you out of the mix.
