FS- Charvel San Dimas Pink Ash

  • Thread starter Thread starter the rossness
  • Start date Start date

To buy, sell, or trade in this section, you must have at least 50 posts and have two-factor authentication enabled.

the rossness

the rossness

Well-known member
Up for sale is my Charvel San Dimas Pink Ash guitar. I’ve owned the guitar for the last four months and haven’t bonded with it which is why I’m selling it. The guitar is in great overall condition without any major flaws of note, however it does show minor signs of use from being played. Included are the backplate/ screws and original hangtag. (in a few of the pictures there is a pink strap and dice knobs which aren't included.) $750 paypal'd and shipped anywhere in the continental USA.

I’ve made a few upgrades and they include-
  1. DMT Baker Act pickup in the bridge position. It’s wired just as the original pickup was for split coil operation via the guitar’s push/pull volume knob
  2. The guitar features an ebony fingerboard, but I like the look of maple and installed a maple fingerboard graphic from Neck Illusions, covering the entire fingerboard. It's easily removable if you don’t like the look and has zero affect on playability or tone.
  3. There is a black EVH D-Tuna installed and the tremolo is blocked for dive-only. Currently the guitar is tuned a whole step down and set up with 9-46 Ernie Ball Hybrid strings.
  4. There are 2 Heavy-duty noiseless springs in the tremolo cavity


IMG_6243.jpeg

IMG_6240.jpeg

IMG_6244.jpeg


full gallery- https://www.rosspics.com/#/charvel-san-dimas-pink-ash/
 
Last edited:
Briman24 said:
Do have the original pickup?
Click to expand...
I do. and I'd be perfectly happy to pull the Baker Act out and replace it with the original Super Distortion, but you're going to have to wire it up yourself. I suck at soldering and have a local shop do all my electronics work.
 
the rossness said:
I do. and I'd be perfectly happy to pull the Baker Act out and replace it with the original Super Distortion, but you're going to have to wire it up yourself. I suck at soldering and have a local shop do all my electronics work.
Click to expand...
I just pulled the trigger on one locally here. Thanks for reply. Good luck with sale.
 
would love to get this guy sold, its just sitting these days
 
You must log in or register to reply here.
Back
Top