Qweklain
Active member
Brief & Accurate Description of gear/guitar: Jillard Empress-7
Modifications (if any
None
Accessories (hardshell case etc Rockhard (by Warwick) HS Case
Location (City,State or City,Country Minnesota
International OK? : Maybe, PM me
Contact Info (No Phone #s PM me
References (eBay or other forum userid Qweklain on here, Rig-Talk, eBay
Price: $2400
Trades: See end of post
___Specs___
White Limba body (Semi-hollow)
Pale Moon Ebony top
White Limba/Wenge 7-piece set-neck
White ebony fretboard
EVO gold Jumbo frets
KxK-like neck profile (slightly more rounded at the shoulders & back)
25-26.5" scale
Ebony off-set block inlays
1-vol | 1-tone | 3-way blade | coil-splitting mini-toggle
Custom Jillard multi-scale bridge
Custom Gold Lace Alumitone humbuckers
___The Bad___
- The horizontal line for the inlay at fret 3 is not perfectly straight.
- The cut-out for the blade switch is not perfect.
- This will not intonate lower than 3/4 of a step.
Picture Library: Jillard Empress-7
Brief & Accurate Description of gear/guitar: Ormsby Custom SX-7
Modifications (if any None
Accessories (hardshell case etc Ormsby HS case
Location (City,State or City,Country Minnesota
International OK? : Maybe, PM me
Contact Info (No Phone #s PM me
References (eBay or other forum userid Qweklain on here, Rig-Talk, eBay
Price: $3500
Trades: See end of post
___Specs___
Tasmanian Blackwood Body
Flame Maple top
Tasmanian Blackwood neck
Ebony fretboard
SS frets
D-style neck. Think Ibanez, but a little bit thicker.
25-27.5" scale
Offset MoP Dot inlays
1-vol | 1-tone | 3-way toggle | coil-splitting push-pull (tone knob)
Kahler multi-scale bridge
Ormsby humbucker and single coil (not sure on models)
___The Bad___
- If you use trems like Kerry King, you will go out of tune with this.
Picture Library: Ormsby Custom SX-7
___Trades___
- High-end guitars (7-string) only with traditional floating bridges (FR, Hipshot Contour, Wilkinson, etc.)
- May consider a fixed bridge IF it is H-S-H
- Preamps (high-end); some I am looking for below...
Engl E580
Steavens Radioactivator (preferably MIDI version)
Brunetti Mille/Mille CR
- Amplifiers (some I am looking for below...)
Revv Generator 120
Mike Fortin Natas or Meathead
Fryette CLX
- Feel free to throw whatever at me, but I am very picky.
Modifications (if any
NoneAccessories (hardshell case etc
Rockhard (by Warwick) HS CaseLocation (City,State or City,Country
MinnesotaInternational OK? : Maybe, PM me
Contact Info (No Phone #s
PM meReferences (eBay or other forum userid
Qweklain on here, Rig-Talk, eBayPrice: $2400
Trades: See end of post
___Specs___
White Limba body (Semi-hollow)
Pale Moon Ebony top
White Limba/Wenge 7-piece set-neck
White ebony fretboard
EVO gold Jumbo frets
KxK-like neck profile (slightly more rounded at the shoulders & back)
25-26.5" scale
Ebony off-set block inlays
1-vol | 1-tone | 3-way blade | coil-splitting mini-toggle
Custom Jillard multi-scale bridge
Custom Gold Lace Alumitone humbuckers
___The Bad___
- The horizontal line for the inlay at fret 3 is not perfectly straight.
- The cut-out for the blade switch is not perfect.
- This will not intonate lower than 3/4 of a step.
Picture Library: Jillard Empress-7
Brief & Accurate Description of gear/guitar: Ormsby Custom SX-7
Modifications (if any
NoneAccessories (hardshell case etc
Ormsby HS caseLocation (City,State or City,Country
MinnesotaInternational OK? : Maybe, PM me
Contact Info (No Phone #s
PM meReferences (eBay or other forum userid
Qweklain on here, Rig-Talk, eBayPrice: $3500
Trades: See end of post
___Specs___
Tasmanian Blackwood Body
Flame Maple top
Tasmanian Blackwood neck
Ebony fretboard
SS frets
D-style neck. Think Ibanez, but a little bit thicker.
25-27.5" scale
Offset MoP Dot inlays
1-vol | 1-tone | 3-way toggle | coil-splitting push-pull (tone knob)
Kahler multi-scale bridge
Ormsby humbucker and single coil (not sure on models)
___The Bad___
- If you use trems like Kerry King, you will go out of tune with this.
Picture Library: Ormsby Custom SX-7
___Trades___
- High-end guitars (7-string) only with traditional floating bridges (FR, Hipshot Contour, Wilkinson, etc.)
- May consider a fixed bridge IF it is H-S-H
- Preamps (high-end); some I am looking for below...
Engl E580
Steavens Radioactivator (preferably MIDI version)
Brunetti Mille/Mille CR
- Amplifiers (some I am looking for below...)
Revv Generator 120
Mike Fortin Natas or Meathead
Fryette CLX
- Feel free to throw whatever at me, but I am very picky.