M
Monster Plexi
Member
San Dimas Style Charvel Dinky Snakeskin Guitar Body
Up for sale is an ultra-cool ABSOLUTELY KILLER Repro San Dimas Style Charvel Dinky guitar body by KnE Guitars! It has been professionally covered in Boa snakeskin vinyl. Body comes exactly as shown which includes single volume potentiometer, brass barrel knob, studs and inserts for Floyd Rose bridge, brass trem spring claw from Floyd Upgrades, black electrosocket brand output jack, and 2 brass screws for direct mounting of a long-leg base humbucker pickup.
If you are looking to build the ultimate 80s rock machine, this body certainly fits the bill! It doesn't get any cooler than snakeskin in terms of a Charvel/Jackson 80s rock machine!!
Important Additional Info
1- The neck pocket route is for a Charvel/Jackson guitar neck which is 2.25 inches in width, which is standard Charvel/Jackson neck heel size. A vintage Fender style neck will not work with this body as its heel width is smaller.
2- The bridge humbucker route is designed for directly screwing a long-leg base humbucker into the body. Two small-diameter brass screws are included for this purpose (see photo of bridge pickup cavity route). The diameter of these screws is small so that you do not have to deface the base of you long-leg humbucker by drilling it out for large screws.
3- The body has been previously fitted for Jim Dunlop strap locks, so the mounting holes are there, but Jim Dunlop strap locks are not included as part of the sale.
Body Specs
Shape - Charvel Dinky
Neck Pocket Route - 2.25 inches for Charvel/Jackson style neck heel
Bridge Route - Floyd Rose flush mount (not recessed)
Body Wood - Alder
Weight - 4 lbs 3 oz using digital postal scale
Pickup Route - Single humbucker
Photos located here: https://reverb.com/item/9245061-kne-charvel-dinky-snakeskin
Price: $375 shipped and Paypaled within Continental United States
Up for sale is an ultra-cool ABSOLUTELY KILLER Repro San Dimas Style Charvel Dinky guitar body by KnE Guitars! It has been professionally covered in Boa snakeskin vinyl. Body comes exactly as shown which includes single volume potentiometer, brass barrel knob, studs and inserts for Floyd Rose bridge, brass trem spring claw from Floyd Upgrades, black electrosocket brand output jack, and 2 brass screws for direct mounting of a long-leg base humbucker pickup.
If you are looking to build the ultimate 80s rock machine, this body certainly fits the bill! It doesn't get any cooler than snakeskin in terms of a Charvel/Jackson 80s rock machine!!
Important Additional Info
1- The neck pocket route is for a Charvel/Jackson guitar neck which is 2.25 inches in width, which is standard Charvel/Jackson neck heel size. A vintage Fender style neck will not work with this body as its heel width is smaller.
2- The bridge humbucker route is designed for directly screwing a long-leg base humbucker into the body. Two small-diameter brass screws are included for this purpose (see photo of bridge pickup cavity route). The diameter of these screws is small so that you do not have to deface the base of you long-leg humbucker by drilling it out for large screws.
3- The body has been previously fitted for Jim Dunlop strap locks, so the mounting holes are there, but Jim Dunlop strap locks are not included as part of the sale.
Body Specs
Shape - Charvel Dinky
Neck Pocket Route - 2.25 inches for Charvel/Jackson style neck heel
Bridge Route - Floyd Rose flush mount (not recessed)
Body Wood - Alder
Weight - 4 lbs 3 oz using digital postal scale
Pickup Route - Single humbucker
Photos located here: https://reverb.com/item/9245061-kne-charvel-dinky-snakeskin
Price: $375 shipped and Paypaled within Continental United States