FS: Milkman 5W Half Pint - Jupiter Alnico Speaker - $2200 shipped

  • Thread starter Thread starter ners
  • Start date Start date

To buy, sell, or trade in this section, you must have at least 50 posts and have two-factor authentication enabled.

ners

ners

Well-known member
Looking to downsize my rig so moving on what is probably the best Fender styled clean amp around (it's essentially a Princeton preamp with a Bassman power section). Comes with the protective cover, footswitch+cable, and power cable. This is in fantastic shape, has never left my home, and has not been gigged with.

https://rvrb.io/2020-5w-half-pint-wyzajq to peep my feedback

---
ABOUT

The Half Pint was designed to be the most versatile low power amplifier possible. Reverb and tremolo and Class A single ended breakup are just the start of what this little amp can do. With the onboard voltage controlled power scaling, you can turn this amp up to 10 and dial it back to just a fraction of a watt so that your fun zone is volume appropriate for just about anywhere.

This amp is comfortable on stage, in studio, and at home. Because of the variable power, you can set it how you like and adjust the power level for the room.

The power section of this amplifier consists of a single 6V6 power tube biased to class A. The front end is similar to the Creamer, with extended headroom reverb and tremolo.

Jupiter Alnico 12" has a classic American alnico magnet sound. A bit less transparent in the upper midrange, this speaker adds a "woody" tone. Its lively on top, and a bit more focused in the bass response than the Greenback. The speaker starts to break up and add alnico character as the amp is pushed. Its the most efficient of the 3 speaker options.

The amplifier is hand wired onto a turret board with Mercury Magnetics and Jupiter capacitors are standard equipment.

WATTAGE

5W Class A

SPEAKER

12” 50W Alnico Jupiter Speaker, 8 ohm

EFFECTS

Tube tremolo and spring reverb
Includes handwired original design detachable footswitch and 15' cable

DIMENSIONS & WEIGHT

19-7/8" W x 16" H x 9-1/2" D 28lbs
 

Attachments

  • PXL_20230701_160339881.MP.jpg
    PXL_20230701_160339881.MP.jpg
    9.5 MB · Views: 50
  • PXL_20230701_160447914.MP.jpg
    PXL_20230701_160447914.MP.jpg
    7.3 MB · Views: 51
Including price+shipping (fees on you if prefer that route)
 
Back
Top