FS: Millimetric MGS3 - Kinda like a Travis Bean guitar - $3200

[phillybhatesme]

Trade interests would be:
- Semihollows
- Unique guitars (tops and body shapes)
- Guitars with P90s and/or Humbuckers - no single coils please
- Blue is a plus
- Schorr, Frank Bros, Novo Miris, Lockhorn, Baker, Knaggs (there's this really one lightning bolt one on Reverb - will trade this for that immediately)

Sale price - 3200 shipped











Full gallery - https://imgur.com/a/MKZ1gaR

Comes with the original Nanuk hard case with molded interior.
Includes strap locks which are installed in the body.
Pickups: MMLS | A single coil inspired by lipstick and strat pickups
Scale: 25"
Custom bridge and knobs and electronics.

Info below is from the Millimetric site:

The MGS3 was the second Millimetric 6 string guitar design introduced to the range. It’s influence lies heavily in classic offset guitar designs. Offset guitars have been revered by guitarists for decades for their playing comfort, the MGS3 is no different with the emphasis being on ergonomics both sitting and standing. The MGS3 features a 25” scale length, giving it a tighter feel which lends itself very well to heavier string gauges too. This design has become one of our most popular models and a firm favourite among offset guitar fans.

Although you may not see detailed inlay work for example on our instruments, our emphasis instead is on accurate, consistent and quality construction. With attention to detail on fine fretwork, playability and design.

The neck design, as with all of our models, is inspired by aluminium neck guitar construction and although technically is a bolt-on neck design, feels more like a through neck in it’s playability. It also aids the overall resonance due to the strings being anchored on the same piece of wood. The 22 frets are Jescar stainless steel measuring 2.54mm wide and 1.19mm tall, and the fretboard is 12” radius. Neck profile is our standard C to D shape (with signature volute), and you have the choice of 1st and 12th fret rough depth measurements of 19mm to 20mm, 20mm to 21mm or 21mm to 22mm.

We offer a variety of body and neck wood choices, which are common Canadian sourced materials such as Maple, Cherry, Walnut, Poplar or Ash along with finishes which are kinder to our environment such as Livos natural oil, water based metallics or solid colour milk paint. There has been a wide variety of customer requested colours and many of these final instruments can be seen on our social media accounts if you require some inspiration for the direction of your build.

Pickguard, control knobs, switch tip are designed and made in house from acrylic and ABS plastic (with brass insert) respectively. The bridge is also unique to Millimetric, designed and made in house from stainless steel and brass. Tuners are made in the USA by Hipshot products, and are their open gear, locking tuners with modified buttons. Each guitar also comes equipped with a dual action truss rod for accurate adjustment and reliability.

Electronics are wired in house, using quality components and will be visible on the guitar via it’s clear acrylic rear cavity cover.

https://youtu.be/zuwGxHGqBAE?si=KUijrDiEXp0j_FuZ

 

[phillybhatesme]

Bump. I have my eye on one of those Ernie Ball Music Man Kaizen's.

 

[phillybhatesme]

Bump. Dropped the price to 3200 shipped. Very unique, very cool guitar used in the video below.

 

[phillybhatesme]

Bump. Would love to trade for a jazzmaster-like G with P90s.

 

[phillybhatesme]

Bump. Trade me a boomer guitar for my pseudo boomer guitar?