mystixboi
Well-known member
I have the following 5 pedals for sale. All are in great condition. All pricing includes paypal. Add $5 for shipping. If you buy more than 1, I’ll adjust the price. No trades thanks.
Please let me know if you have any additional questions. Thank you.
Digitech Bad Monkey $40 - Velcro on bottom
Boost Your Amp
The Bad Monkey Tube Overdrive gives your amp a boost just when you need it. It has been compared to the TS-808 but with having the unique ability to smooth out the distortion by use of the low and high EQ controls. Most overdrive pedals give you one tone control knob thus limiting your tonal options. You asked for a pedal that will maintain your guitar's distinct tone and DigiTech delivered! With its rugged design, separate mixer and amp outputs, and amazing tonal options, this pedal truly is a Bad Monkey. From Blues to Rock to everything in between, it will give you that amazing overdriven tube amp sound that will keep begging you to crank it up!
Features
• Level boosts the output level of your guitar signal.
• Low adjusts boost and cut of bass frequencies.
• High adjusts boost and cut of upper harmonics.
• Gain provides smooth tube amp distortion to your sound.
• High adjusts boost and cut of high frequencies.
• Dual Outputs. The Amp output is for connecting directly to a guitar amplifier. The Mixer output features Cabinet Emulation circuitry for connecting directly to a mixing board or recording device.
Mooer Echoverb $50 – no velcro
Echo Verb combines a new high quality reverb and digital delay into one small pedal. Either effect can be used alone or simultaneously for. The versatile controls allow the user to easily dial in Echo Verb to be used in a myriad of different ways, be it subtle ambient enhancement or huge wet special effects. The delay comes complete with Tap Tempo which can be operated via the footswitch or with the small LED button in the centre of the pedal. Perfect companion for a small pedal rig.
Controls
Controls switch
epicts which effect the controls are adjusting. Switch up to adjust Delay(Tape Echo) parameters switch down to adjust reverb parameters.
LEVEL/MIX control:Adjusts volume of delay and wet/dry mix of reverb.
TIME/TONE: Adjusts Delay time(45ms-1600ms) and Reverb tonality.
FB/DECAY:Adjusts Delay feedbackand Reverb decay(Room-Mountains).
Tap Tempo Functionality:
1?Footswitch Modeepressing the footswitch for more than 1 seconds will engage Tap Tempo functionality and the LED will flash. Tap the footswitch two or more times to synchronize the delay to your desired tempo. The pedal will revert back to normal operation after 5 seconds.
2?LED Mode: Tap the LED 2 or more times to synchronize the delay to your desired tempo.
Specification
Input:1/4” mono audio jack.(Impedance: 470k Ohms)
Output:1/4” mono audio jack(mpedance: 100 Ohms)
Power requirements:AC adapter 9V DC ,center negative.
Highly recommend to use Mooer Micro Power.
Current Draw:160mA
Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
Weight:146g
Donner Yellow Fall Delay $30 – Velcro on bottom
• Pure analog Whole circuit delay, clear, plump and smooth New Delay effect. Aluminium-alloy classic, stable and strong
• Aluminium-alloy classic, stable and strong.
• True bypass provide transparent tone,LED indicator shows the working state.
• 3 Knobs, ECHO is mix, TIME for 20-620ms delays, FEEDBACK is the repetions.
• Important instructions 1-Please make sure the the diameter for power plug using is 5.5, and the power for the adapter is OUT-DC 9V- 500mA 4.5W. The misusage for power adapter usually can lead to a loud buzzing sound
• Package includes: Donner Yellow Fall Delay Pedal and Owner Manual, Power supply(not included)
Donner Noise Killer $30
• 1.Two models.Hard Mode: Provide hard effect of noise reduction, Soft Mode: Provide soft effect of noise reduction.
• 2.Adjusting the noise reduction degree:-70—+10dB
• 3.Whole Aluminium-alloy classic, stable and strong
• 4.True bypass provide transparent tone.LED indicator shows the working state.
• 5.DC 9V Adapter power supply. Working Current: 26mA
Electro Harmonix LPB-1 $25 – no velcro
• Small die-cast case saves valuable pedal board space
• Put this little monster in line before any effect to provide boost and definition
• Improves the gain and saturation of your amp
• The Nano LPB-1 Power Booster gives your sound presence! Housed in a compact, die-cast box with rounded corners to save valuable pedal board space
• 9V DC power jack
Please let me know if you have any additional questions. Thank you.
Digitech Bad Monkey $40 - Velcro on bottom
Boost Your Amp
The Bad Monkey Tube Overdrive gives your amp a boost just when you need it. It has been compared to the TS-808 but with having the unique ability to smooth out the distortion by use of the low and high EQ controls. Most overdrive pedals give you one tone control knob thus limiting your tonal options. You asked for a pedal that will maintain your guitar's distinct tone and DigiTech delivered! With its rugged design, separate mixer and amp outputs, and amazing tonal options, this pedal truly is a Bad Monkey. From Blues to Rock to everything in between, it will give you that amazing overdriven tube amp sound that will keep begging you to crank it up!
Features
• Level boosts the output level of your guitar signal.
• Low adjusts boost and cut of bass frequencies.
• High adjusts boost and cut of upper harmonics.
• Gain provides smooth tube amp distortion to your sound.
• High adjusts boost and cut of high frequencies.
• Dual Outputs. The Amp output is for connecting directly to a guitar amplifier. The Mixer output features Cabinet Emulation circuitry for connecting directly to a mixing board or recording device.
Mooer Echoverb $50 – no velcro
Echo Verb combines a new high quality reverb and digital delay into one small pedal. Either effect can be used alone or simultaneously for. The versatile controls allow the user to easily dial in Echo Verb to be used in a myriad of different ways, be it subtle ambient enhancement or huge wet special effects. The delay comes complete with Tap Tempo which can be operated via the footswitch or with the small LED button in the centre of the pedal. Perfect companion for a small pedal rig.
Controls
Controls switch
epicts which effect the controls are adjusting. Switch up to adjust Delay(Tape Echo) parameters switch down to adjust reverb parameters.LEVEL/MIX control:Adjusts volume of delay and wet/dry mix of reverb.
TIME/TONE: Adjusts Delay time(45ms-1600ms) and Reverb tonality.
FB/DECAY:Adjusts Delay feedbackand Reverb decay(Room-Mountains).
Tap Tempo Functionality:
1?Footswitch Mode
epressing the footswitch for more than 1 seconds will engage Tap Tempo functionality and the LED will flash. Tap the footswitch two or more times to synchronize the delay to your desired tempo. The pedal will revert back to normal operation after 5 seconds.2?LED Mode: Tap the LED 2 or more times to synchronize the delay to your desired tempo.
Specification
Input:1/4” mono audio jack.(Impedance: 470k Ohms)
Output:1/4” mono audio jack(mpedance: 100 Ohms)
Power requirements:AC adapter 9V DC ,center negative.
Highly recommend to use Mooer Micro Power.
Current Draw:160mA
Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
Weight:146g
Donner Yellow Fall Delay $30 – Velcro on bottom
• Pure analog Whole circuit delay, clear, plump and smooth New Delay effect. Aluminium-alloy classic, stable and strong
• Aluminium-alloy classic, stable and strong.
• True bypass provide transparent tone,LED indicator shows the working state.
• 3 Knobs, ECHO is mix, TIME for 20-620ms delays, FEEDBACK is the repetions.
• Important instructions 1-Please make sure the the diameter for power plug using is 5.5, and the power for the adapter is OUT-DC 9V- 500mA 4.5W. The misusage for power adapter usually can lead to a loud buzzing sound
• Package includes: Donner Yellow Fall Delay Pedal and Owner Manual, Power supply(not included)
Donner Noise Killer $30
• 1.Two models.Hard Mode: Provide hard effect of noise reduction, Soft Mode: Provide soft effect of noise reduction.
• 2.Adjusting the noise reduction degree:-70—+10dB
• 3.Whole Aluminium-alloy classic, stable and strong
• 4.True bypass provide transparent tone.LED indicator shows the working state.
• 5.DC 9V Adapter power supply. Working Current: 26mA
Electro Harmonix LPB-1 $25 – no velcro
• Small die-cast case saves valuable pedal board space
• Put this little monster in line before any effect to provide boost and definition
• Improves the gain and saturation of your amp
• The Nano LPB-1 Power Booster gives your sound presence! Housed in a compact, die-cast box with rounded corners to save valuable pedal board space
• 9V DC power jack