Help me find a midi loop switcher

  • Thread starter Thread starter FLYINRYAN11
  • Start date Start date
FLYINRYAN11
FLYINRYAN11
Member
Looking for recommendations on a midi loop switcher that is super simple and easy to use. All I need it for is to control two pedals in my amps fx loop(seymour duncan dark sun and mxr micro amp for solos). Thats all. Everything iv seen is elaborate, lots of loops, and looks too complicated. Maybe have 4 presets or so is all I need. Thanks for the input
 
I have a MIDI 2 X LOOP M2L by GLAB that I will sell to you for $75.00 including shipping and PayPal fees. It is in Mint condition. I used to use it to control 2 pedals via MIDI.

MIDI 2 X LOOP allows to add two additional effects’ loops to the guitar system. M2L is a loops’ switcher controlled by MIDI interface (by Program Change or Control Change commands) or manually, by using the buttons on the top of the device. Using the MIDI commands it is also possible to mute the signal (e.g. for silent tuning). M2L should be controlled by programmable MIDI controller (which enables to program desired No. of PROG CHANGE or CTRL CHANGE command for a given preset). It is particularly recommended as an extension for the G LAB guitar system controllers GSC. Due to its passive signal path it is also possible to use the M2L as an A/B/Y switcher.
Basic characteristics:
two bypassed (by electro mechanic relay) loops to connect the pedal effects or serially connected sets of effects,
muting circuit based on opto elements,
MIDI THRU connector to connect other MIDI devices,
power supply and active loop indicators,
two buttons for loops’ manual on/off switching,
power supply 9V DC (direct current).

 

Attachments

  • g-lab-midi-2x-looper-2127513.jpg
    g-lab-midi-2x-looper-2127513.jpg
    66.6 KB · Views: 303
  • g-lab-midi-2x-looper-2127512.jpg
    g-lab-midi-2x-looper-2127512.jpg
    58.9 KB · Views: 166
 
Back
Top