Help needed regarding a TOL100 footswitch

  • Thread starter Thread starter Davidarnarsson
  • Start date Start date
D

Davidarnarsson

New member
Hi there!

I have a Rocktron manufactured TOL100 which has served me well over the last few years. Recently, the footswitch has started malfunctioning, the switches now only work, say, every fourth, fifth time i step on them. It kinda becomes painful when you gig alot not being able to count on the switches :lol: :LOL:. Anyway, I thought that some contact spray might do them good, but when I opened the footswitch, I saw that the switches are completely sealed off with plastic. My question is, what kind of switches do I need to get it back to working condition? Will a 3PDT switch work?

I have 0 experience or knowledge of any kind regarding these matters, so please help me :)

Some pics:
fs1.jpg

fs2.jpg

fs3.jpg


oh, and some utterly unnecessary shameless plug( and egnater tol100 clips! Check out Stevie Wonder and Run ): http://myspace.com/mikadotheband :rock:
 
Davidarnarsson":2a2pe8hn said:
Hi there!

I have a Rocktron manufactured TOL100 which has served me well over the last few years. Recently, the footswitch has started malfunctioning, the switches now only work, say, every fourth, fifth time i step on them. It kinda becomes painful when you gig alot not being able to count on the switches :lol: :LOL:. Anyway, I thought that some contact spray might do them good, but when I opened the footswitch, I saw that the switches are completely sealed off with plastic. My question is, what kind of switches do I need to get it back to working condition? Will a 3PDT switch work?

I have 0 experience or knowledge of any kind regarding these matters, so please help me :)

Some pics:
fs1.jpg

fs2.jpg

fs3.jpg


oh, and some utterly unnecessary shameless plug( and egnater tol100 clips! Check out Stevie Wonder and Run ): http://myspace.com/mikadotheband :rock:


Randall makes a 4 switch Midi controller which works great with a TOL 100, it's for their RM 4 preamp. I've used them with great results ;)
 
suzuki211":1tfe0gxs said:
Randall makes a 4 switch Midi controller which works great with a TOL 100, it's for their RM 4 preamp. I've used them with great results ;)


Okay, brilliant, I'll check it out, I'll see if the local distributor has any of those. Thanks! :thumbsup:
 
You can get the good Carling brand switches from newsensor.com

P/N is SW110PM-OFF (SPST N/O Momentary pushbutton)
 
bruce egnater":13fyksb6 said:
You can get the good Carling brand switches from newsensor.com

P/N is SW110PM-OFF (SPST N/O Momentary pushbutton)

Nice, thanks!
 
Back
Top