HELP PLEASE!!! PROBLEMS WITH EINSTEIN FUSES!!!!

[Metalhead]

I would greatly appreciate it if someone with a Diezel Einstein could tell me what type of fuses I should use for the 2 main fuses (just under where the power cable plugs in)? It keeps popping them when I use the 250 volt 1/2 milliamp slow blow fuses, which I thought were the correct ones. Am I using the wrong ones??? I think I must be because everything else seems to be in order. 911 HELP, I'VE GOTTA GET THIS FIXED FOR MY BUDDY!!!!

 

[nbarts]

Einstein all models
Mains: Euro: 230V/240V 2AT
US/Jap: 100V/120V 4AT
Tube Fault: 0.5AT

Internal:
Mainboard: F1 (High voltage) 1.6AT
F2 (Low voltage) 1.6AT

 

[nbarts]

pull the power tubes out, replace the fuse. if it doesn't blow again, replace with a new set of power tubes

there is only 1 main fuse, the other one is a spare.

make sure to check all the tube fault fuses too.

 

[Peter Diezel]

Thanks NBARTS

 

[Metalhead]

Thanks for the tip buddy. Worked like a charm!