Herbert Serial # help...

[Mailman1971]

Herbert Serial # 01/937

No external Bias points.
Loaded with el34's stock.
Tone......HEAVEN!!

Any help is appreciated.

Thanks!!

Dan

 

[SpicedMuffin]

well mine is 001/369 it was built 2004/2005
it does have external bias but no fault LEDS

 

[Mailman1971]

well mine is 001/369 it was built 2004/2005
it does have external bias but no fault LEDS

Mine has the fault LEDS.....
But no bias points.
It sounds INCREDIBLE!

Yeah....I am still on a "Herbert HIGH".....

 

[SpicedMuffin]

I also luv my herbert no other amp compares in my my eye's

 

[MARK2C]

001/937 should be 2008. Didn't Herbert 1000 come out in late 2008 or early 2009 ?

It should have bias points.

 

[Mailman1971]

001/937 should be 2008. Didn't Herbert 1000 come out in late 2008 or early 2009 ?

It should have bias points.

Do I need to remove the back grill to get to the Bias points?
On my Egnater they were right about where the LED fault lights are.
The sales guy told me it was a 2008 or 2009 model. New old stock.

 

[ttosh]

001/937 should be 2008. Didn't Herbert 1000 come out in late 2008 or early 2009 ?

It should have bias points.

Do I need to remove the back grill to get to the Bias points?
On my Egnater they were right about where the LED fault lights are.
The sales guy told me it was a 2008 or 2009 model. New old stock.

Yes remove the black grill, they are right there for you to see, I bet you have them!!

 

[Mailman1971]

001/937 should be 2008. Didn't Herbert 1000 come out in late 2008 or early 2009 ?

It should have bias points.

Do I need to remove the back grill to get to the Bias points?
On my Egnater they were right about where the LED fault lights are.
The sales guy told me it was a 2008 or 2009 model. New old stock.

Yes remove the black grill, they are right there for you to see, I bet you have them!!

Ahhhhhhh........so I see said the Blind man!
I thought they would be on the Outside of the amp same as the Egnaters.
Will check it when I get home tonite!!

But its loaded with my Fave tubes already "EL-34's".....so need need to mess with it....yet!
Thanks for this info!!

Dan

 

[bronz79]

MM71, you can see bias points also with the rear grille installed,
only to use them you must remove the 4 screws of the rear grille.

 

[Mailman1971]

MM71, you can see bias points also with the rear grille installed,
only to use them you must remove the 4 screws of the rear grille.

Thanks for all your help guys!!
I will check it in the morning.
just got home from work and whipped.

 

[Peter Diezel]

001/937 was sent on December 19th 2007 to Uwe Salwender.

You got mail.

 

[Mailman1971]

001/937 was sent on December 19th 2007 to Uwe Salwender.

You got mail.

Thank you Peter!!
Emails replied and you and your company........

Simply the BEST on the planet!

Dan

 

[Peter Diezel]

 

[Jimmie]

001/937 was sent on December 19th 2007 to Uwe Salwender.

You got mail.

From Trabuco Canyon California?

 

[MARK2C]

001/937 was sent on December 19th 2007 to Uwe Salwender.

You got mail.

From Trabuco Canyon California?

That's the guy. Formerly of Salwender International, Diezel's old US distributor.