How to tell what power unit I need

[daverook]

I'm creating my first pedal board. I understand how to set them up, but the power is confusing me.

The gear I have is

Engl Z-15 MIDI Foot Controller (Power supply: 9 to 13 volts AC or 9 to 15 volts DC, approx. 300 mA)
Hughes & kettner tube factor (input:120v ac/60hz/86.7mA/10.4VA output: 12v ac/700mA/ 8.4va listed)
Korg Pitchblack Chromatic Tuner (9v)
Digitech Digidelay (9v)
Danelectro Fish n Chips EQ (9v)

So, a small set up.

Would I be able to use

https://www.andertons.co.uk/p/TREXFUELT ... wer-supply

Or is the Chameleon more suited to the higher mA? https://www.andertons.co.uk/p/TREXFUELC ... wer-supply

If I've understood it would this mean the Engl, Tuner, Delay and EQ (which are all 9v) can all run off 9V and the Tube Factor can run off the 12V?

Thanks in advance for any help

 

[8len8]

For the Tube Factor you listed what its power supply specs are. You need to look up what the actual Tube Factor power input specs are.