I think I've found my clean tone with the VX

  • Thread starter Thread starter Wagster
  • Start date Start date
W

Wagster

New member
I've been struggling with my clean tones since I bought the Mod50. Today I tried running the VX with the gain lower w/o the bright boost. I kept comparing it to my 2000TBX and feel that even know I'm not using the Blues with the Mod50 I'm getting in the ballpark. The tone sounds damn good to my ears.

So I have a question. I have a custom DLX-C that Bruce built for me. It sounds great but I'm a Vox guy. I'm looking to trade it for a Marshally module. For the music I'm playing I'm thinking either a SL or SL2X. Here's an example of a tone I could use on my gig. Cheesy tune but cool guitar tone.


Thanks guys,
Billy
 
Wagster":tlogrtiy said:
I've been struggling with my clean tones since I bought the Mod50. Today I tried running the VX with the gain lower w/o the bright boost. I kept comparing it to my 2000TBX and feel that even know I'm not using the Blues with the Mod50 I'm getting in the ballpark. The tone sounds damn good to my ears.

So I have a question. I have a custom DLX-C that Bruce built for me. It sounds great but I'm a Vox guy. I'm looking to trade it for a Marshally module. For the music I'm playing I'm thinking either a SL or SL2X. Here's an example of a tone I could use on my gig. Cheesy tune but cool guitar tone.


Thanks guys,
Billy

For that tone...I'd go w/ a COD honestly.. Especially if you put a 500 - 1000pF cap on the vertical tube board's treble bleed circuit. Otherwise a SL would be best for that. Sl2 would be too much gain IMHO.

Eric
 
I have a COD for sale. ;) my Favorite mod :thumbsup: Does a gilmore hiwatt tone also
 
Jeff H .had posted this clip before I swear .although I could be wrong .I think they are using Egnater . I can't remember I thought it was a SL2 on the solo
 
I have the COD and I agree that it will kick that song in the A**! In addition, the second channel of the COD produces some killer ZZTop quality gain and punch. I've run it through closed and open back 2x12's and is currently powering a 4x10 open back cab. (I"m waiting on my beam blockers for the 4x10.....then...LOOKOUT!)
 
For that tone...I'd go w/ a COD honestly.. Especially if you put a 500 - 1000pF cap on the vertical tube board's treble bleed circuit. Otherwise a SL would be best for that. Sl2 would be too much gain IMHO.

Eric
Wow a COD huh? Are there any COD clip out there that are in a similar vein?
 
Country tunes in Drop Db. Almost makes you want to play that one.
 
Wagster - Just curious as to what kind of speakers/cab you ended up going with to get the VX clean tones to the point you are happy with it? Also, for a higher gain tone like in that vid, I would recommend the SL. I think the COD is a cool module capable of getting a lot of different tones, but I've never liked it in a live setting...always feels way too compressed for me.
 
Beagle1":2nmr5k8v said:
Wagster - Just curious as to what kind of speakers/cab you ended up going with to get the VX clean tones to the point you are happy with it? Also, for a higher gain tone like in that vid, I would recommend the SL. I think the COD is a cool module capable of getting a lot of different tones, but I've never liked it in a live setting...always feels way too compressed for me.
I'm using a TM 2x12 with Elite 80's. That may change but for right now that's all I have other than my AC30 cab with Blues.
 
It turns out that what I don't like about the Mod50 clean tones is either the TM 2x12, Elite 80's or both. The Head sounds killer through my AC30 cab with a Blue/G12H combo although it's not enough power for the amp. It sounds like I need either a pair of 65 watt Scumnico's or M75's. Whew now I can take a sigh of relief.
 
Wagster":2qk4rn93 said:
It turns out that what I don't like about the Mod50 clean tones is either the TM 2x12, Elite 80's or both. The Head sounds killer through my AC30 cab with a Blue/G12H combo although it's not enough power for the amp. It sounds like I need either a pair of 65 watt Scumnico's or M75's. Whew now I can take a sigh of relief.

Cleans sound big and beautiful through my stock TM212...almost acoustic like. :thumbsup:
 
I'm glad they are working for you. I'm not having as much luck.
 
gtr31":16m850qn said:
Jeff H .had posted this clip before I swear .although I could be wrong .I think they are using Egnater . I can't remember I thought it was a SL2 on the solo


i went backstage at jason's concert in fort scott, kansas, in nov.?
and the gtr player had a mesa electrodyne and lone star rig. didn't see eggie modules but maybe they were hiding...
 
mentoneman":3jq8urmt said:
gtr31":3jq8urmt said:
Jeff H .had posted this clip before I swear .although I could be wrong .I think they are using Egnater . I can't remember I thought it was a SL2 on the solo


i went backstage at jason's concert in fort scott, kansas, in nov.?
and the gtr player had a mesa electrodyne and lone star rig. didn't see eggie modules but maybe they were hiding...
I know this is going to sound crazy but I think a BF Bassman head and a tube screamer were used on that track. I remember my friend who knows those guys telling me that a while back.
 
Back
Top