Isocab building instructions?

  • Thread starter Thread starter Juggernaut
  • Start date Start date
Juggernaut

Juggernaut

Well-known member
anyone got any plans or maybe a link to building an Isocab with 1 12" speaker?
 
very cool, Mine will be a bit smaller....1x12 cab, and may have to mod it for a permanent mic residence.

I'd like to find some plans for one like the Randall Isocab, where the speaker is permenantly installed.


hmm.....
 
If I could afford it right now, I'd already have one, BUT I can afford a sheet of wood, and I have everything else..... :)
 
I tried an AxeTrak but didn't care for it much. Here's a review I did with clips. I also tried the Roland ISO box, but didn't like that either. I wound building one myself, starting with the link gaijun posted. I built it a little smaller, since I was only housing a 1x12. I lined it with WhisperMat 2, and it's pretty quiet with the amp at reasonable volumes. I'm thinking about a different design, but it's working for now.
 
i Made mine the Size of a Real Coffin
mounted the speaker in the Feet section and Mic Holders'sin the Mid section Not Bad But Kind of an Unusual Shape :thumbsup:

whats nice is i can Remove each speaker by slideing it out
and replaceing the Next one and just screw it down again ;)
 
:|::QBB:
gaijun":a0795 said:
i Made mine the Size of a Real Coffin
mounted the speaker in the Feet section and Mic Holders'sin the Mid section Not Bad But Kind of an Unusual Shape :thumbsup:

whats nice is i can Remove each speaker by slideing it out
and replaceing the Next one and just screw it down again ;)
Click to expand...

Nice - is it a square kinda coffin or with the angled head? Is it lined with anything?
 
mike are you trying to build in iso-cab like the one randall makes...or just an enclosure for a 1x12?

i'm getting a boogie 1x12 and wouldn't mind building a box for it myself :D
 
I was originally thinking like the Randall but the more I look at them, I think putting my 1x12 into a box would probably work better...


You gonna do one too?
 
:|::QBB:
fredster":944c0 said:
:|::QBB:

Nice - is it a square kinda coffin or with the angled head? Is it lined with anything?
Click to expand...

it is angeled and is lined with Soft Egg Wrap all around about 4 feet in legenth i installed Cable plug's in their for The Mic Cables and lined some Insulation behind the speaker

i actually made one of these back in High school
when i had a Hearse for my 2nd car
we would Pull the Box out and open the lid
freak out some people while get a Nice Sound from the stereo
so i though id do it again when i read someone called these Speaker coffin's :thumbsup:

My Boss is a Preacher today
he give me the Chills' more then Makeing the Coffin :lol:
He dont Metal Music But he dont Stop me from Playing it
beside's the fact he likes it when im doing instramental stuff more :P
 
i want to, just not sure if i can make room for it right now

i'm buying a mesa 1x12 cab later this week :D
 
just send it to me, and I'll put it to good use ;)


how much you give for it? I need to get one myself, I'm still using my little Fender 1x12 cabs, but they get the job done for now.
 
im going to turn the Ol Ladys Foot Chest
( solid Cherry ) into the Next Coffin :thumbsup:
 
You must log in or register to reply here.
Back
Top