Jeff, I need the exact dimensions of the Renegade head pls.

[Joeytpg]

I'm ordering a few flightcases for my amps, and I wanna go ahead and order a flightcase for the Renegade I'm ordering tomorrow.

I need long x with x tall


or anyone that has the renegade head that can help me please.

 

[Len Rabinowitz]

I would assume this is available on the Egnater website. Go to the amp and look at the specs.

 

[aeroic]

from http://egnateramps.com/Renegade.html

Renegade Head Features
• 65-Watt All-Tube Head
• Two Independent Channels Each With:
— Volume, Gain, 3-Band EQ
— Tight and Bright Voicing Switches
— 18w / 65w Wattage Selector Switch
— Tube Mix Blends 6L6 and EL34 Power Tubes
• Master Controls:
— Presence & Density
— Individual Reverb on Each Channel with “Spillover”
— Main and Secondary Master Volumes
• Four-Button Footswitch with Channel Select Plus:
— Assign the REVERB, EFFECTS LOOP and MAIN 2 Volume to Just Channel 1, Just Channel 2 or Both - Right From the Pedal • Simple Master Bias Adjust with External Test Points
• Buffered Effects Loop
• Balanced XLR / ¼” Cabinet Voiced Line / Recording Output
• 100V / 115V / 230V Voltage Selector
• Heavy Duty Cover Included
• Dimensons: 25" (L) x 10" (W) x 10" (H)
• Weight: 35 lbs

 

[RockStarNick]

I would also call a store, and ask them to actually measure one, just in case.

 

[Joeytpg]

thank you guys

 

[kingsryche]

I'm stopping by GC today to get a couple of patch cables. They were supposed to be getting a Renegade in when I was in there a couple of weeks ago. I'll take my tape measure with me and if they have it I'll see if I can confirm the posted specs on the website.

 

[Joeytpg]

dude you're killer, thanks for that

 

[aeroic]

I'm stopping by GC today to get a couple of patch cables. They were supposed to be getting a Renegade in when I was in there a couple of weeks ago. I'll take my tape measure with me and if they have it I'll see if I can confirm the posted specs on the website.

Well the egnater posted ones are exactly right for the USA stuff..wouldn't see why the Chinese made ones would be any different.

Secondly, if you are getting flight cases w/ foam...they'll have some wiggle room anyways.

Eric

 

[kingsryche]

dude you're killer, thanks for that

Just got back from GC, alas, no Renegade. Sorry my man.

Well the egnater posted ones are exactly right for the USA stuff..wouldn't see why the Chinese made ones would be any different.

Secondly, if you are getting flight cases w/ foam...they'll have some wiggle room anyways.

Eric

I measured my Rebel and compared to the specs on the website and it wasn't exact. Website shows 14.25 (w) 8.25 (d) 7.5 (h); however, the owner's manual shows 14.00 (w) 8.00 (d) 7.5 (h) which is very close to my physical measurements.

Renegade shows on website 25.00 (w) 10.00 (d) 10.00 (h). The owner's manual shows 10.5 (d) and 9.5 (h). Based off my Rebel, I would say the owner's manual is more accurate. As long as a variance of a 1/2 inch is ok in these flight cases (I've never owned one) then would he be ok either way?