C
CaseyCor
New member
Can I get a list of the all the Egnatrer Moduels?
M
MitchSchaft
New member
http://www.egnater.com/modules.htm
Jeff Hilligan
Well-known member
Thanks Mitch check is in the mail!
R
Rickboot
New member
There are a few new modules not yet on the list:
COD - A Dumble inspired design
TWN/DLX - Blackface Twin and Deluxe
Plus Bruce can make you whatever you want.
COD - A Dumble inspired design
TWN/DLX - Blackface Twin and Deluxe
Plus Bruce can make you whatever you want.
S
SON OF NORTHERN DARKNESS
New member
Weren't there clips of all the modules somewhere? I thought there were some at the Indoor Storm site, but I can't find them.
F
fritzreiser
Member
HughJasol
New member
Feels weird reviving a 3-year-old post . . . but I'd like to know if there are any Egnater dual-channel modules that have come and gone, and are no longer made or shown on Egnater's website. I know the "DLX" is one. Was there ever a dual-channel Twin (I assume it would have been called the "TWN")? Any others?
HughJasol
New member
Ah - I just saw someone mention an "EG1/2" module from an earlier post . . . never heard of that one before. Did I read that right? 
rlord1974
Active member
There was:
1.) T/V (Twin Channel A, VOX Channel B)
2.) T/T (Two identical Twin channels)
1.) T/V (Twin Channel A, VOX Channel B)
2.) T/T (Two identical Twin channels)
HughJasol
New member
Thanks! I didn't realize the T/V (and the D/V that I also heard about) were actually available as stock modules from Egnater. I had (incorrectly) assumed that these were special mods done to a stock T/D (or perhaps to a DLX in the case of a D/V). I learn something new every day here . . . 
jmgman69
New member
If you get a chance,find an old single channel EG3,it is the shitHughJasol":37g0g4x7 said:Thanks! I didn't realize the T/V (and the D/V that I also heard about) were actually available as stock modules from Egnater. I had (incorrectly) assumed that these were special mods done to a stock T/D (or perhaps to a DLX in the case of a D/V). I learn something new every day here . . .
guitarslinger
New member
HughJasol":2zkgv3pd said:Thanks! I didn't realize the T/V (and the D/V that I also heard about) were actually available as stock modules from Egnater. I had (incorrectly) assumed that these were special mods done to a stock T/D (or perhaps to a DLX in the case of a D/V). I learn something new every day here . . .
I don't think they were really stock.
I'll make a list anyways:
TT
TV
TD
DD-DLX
DV?
Bman
COD
SL
VX
SL2
SL2X-GNR
EG3/4
EG5-(prototype is called "X")
Erect
MHG
BTW, EG1/2 has never existed.
muudrock
Active member
jmgman69":f9dmb7d8 said:If you get a chance,find an old single channel EG3,it is the shitHughJasol":f9dmb7d8 said:Thanks! I didn't realize the T/V (and the D/V that I also heard about) were actually available as stock modules from Egnater. I had (incorrectly) assumed that these were special mods done to a stock T/D (or perhaps to a DLX in the case of a D/V). I learn something new every day here . . .
+1000
HughJasol
New member
Is it that different from the A channel of the EG3/4? Much better? Don't think I've ever seen one of these anywhere . . . maybe I'll keep my eyes open for one starting in a few weeks - thanks!jmgman69":2kfas6g4 said:If you get a chance,find an old single channel EG3,it is the shit
guitarslinger
New member
HughJasol":ycizj906 said:Is it that different from the A channel of the EG3/4? Much better? Don't think I've ever seen one of these anywhere . . . maybe I'll keep my eyes open for one starting in a few weeks - thanks!jmgman69":ycizj906 said:If you get a chance,find an old single channel EG3,it is the shit
yes.
The "3" side of the 3/4, is actually closer to the "4", with less gain.
The single channel 3 is more open, and dynamic, IMO.
HughJasol
New member
Thanks Gene . . . I also found a link with sound clips for several modules (here), where there is one module that (technically) isn't on that list: a TWIN. So I can see there was a DLX and a TWIN, but now there's currently only a T/D. I also see that a stock T/D can be modded into either a T/T or a D/D. However, since I own both a DLX and a T/D, I know that even if I were to get my T/D modded into a D/D, it would still be different from my DLX, as the DLX and the T/D have completely different circuit boards (it's actually the current T/D that has its own dedicated PCB - "T/D" is actually etched onto the PCB, as opposed to it using the same bare PCB used by many other modules only with different components).guitarslinger":2gwt3csy said:
This kind of bummed me out, because the only reason I originally acquired both a T/D and a DLX was so that I could compare the component differences in order to be able to mod the module myself and go between a T/D and a D/D until I decided which I liked better; but this was all based on the (incorrect) assumption that the two modules used the same circuit board!
So I have to assume (I know, this already got me into trouble once
) that the older TWIN module also uses a different PCB than the T/D, and thus a T/D modded into a T/T would in fact be different than an original TWIN module. Now, how much different a D/D actually sounds from a DLX, or a T/T sounds from a TWIN is a completely different issue and remains to be seen (or heard in this case) . . . anyone have any experience with these differences?Yeah, I misread that. They were referencing the channels from a couple of older Egnater amps/preamps (I think one was something like an IE2 or an IE4, and the other started with an "M" - I forget though).
jmgman69
New member
What Gene said,it is that much better and was one of my favorites it not thee!!!guitarslinger":2c2k56au said:HughJasol":2c2k56au said:Is it that different from the A channel of the EG3/4? Much better? Don't think I've ever seen one of these anywhere . . . maybe I'll keep my eyes open for one starting in a few weeks - thanks!jmgman69":2c2k56au said:If you get a chance,find an old single channel EG3,it is the shit
yes.
The "3" side of the 3/4, is actually closer to the "4", with less gain.
The single channel 3 is more open, and dynamic, IMO.
felineguitars
Member
jmgman69":niljap35 said:What Gene said,it is that much better and was one of my favorites it not thee!!!guitarslinger":niljap35 said:HughJasol":niljap35 said:Is it that different from the A channel of the EG3/4? Much better? Don't think I've ever seen one of these anywhere . . . maybe I'll keep my eyes open for one starting in a few weeks - thanks!jmgman69":niljap35 said:If you get a chance,find an old single channel EG3,it is the shit
yes.
The "3" side of the 3/4, is actually closer to the "4", with less gain.
The single channel 3 is more open, and dynamic, IMO.
I remember playing an old IE4 in a shop and channel 3 was the standout channel for me
If the EG3 is like that then I can only agree
Wonder if Bruce would do a special module EG3/3 where both channels are the same EG3 allowing different gain settings
The EG3/4 is almost my favourite module (although the SL2x is now my most used) and an EG3/3 may be the jewel in the crown for me
Got me thinking now...........