Loop as Second Master Volume

  • Thread starter Thread starter meuro
  • Start date Start date
meuro

meuro

New member
Those of you who can live without processors in the parallel loop can use this
loop for a second master volume for each channel.
To do this, just loop a short 1/4” cable from send 2 to parallel loop return. Now
you can choose a second master volume by turning the mix control past 1:00 PM
to full open, and push the send 2 button to activate your second master volume.

if I use a multi-effects in parallel loops can i somehow use the Send2 as boost volume?
there is a way to do it? :doh:
thanks :thumbsup:
 
the serial send is not switchable... but you can buy a good clean booster and put it in the serial loop and switch it on and off...
 
I use a Suhr Iso boost and it works great in this application, no tone suck and volume set pretty close to min give just enough boost for solos etc. I use it on my Bogner which doesn't have switchable master volumes & it works great.
 
:confused: a friend told me that you should put volume boost or equalizer in the serial loop :confused:
 
and if i put a good clean boost in "channel insert" of ch3? i'd like to boost only ch3...i love it :thumbsup:
the two peter are great men :thumbsup: :lol: :LOL:
 
i have put in "channel insert 3" tubescreamer but suond terible too mid :aww:
:confused: peter help me please :cry:
 
i said: CLEAN BOOSTER, not distortion pedal. peter can't help you read... that you have to do on your own.
 
You must log in or register to reply here.
Back
Top