M4 MIDI clarification

[mboogman]

I was reading the M4 manual and I'm not 100% clear on the program change stuff. If I am reading this correctly, can you store multiple program changes to a single channel? So, could I have channel 1A respond to program change PC 1 and say, PC 43?

 

[Flump]

I was reading the M4 manual and I'm not 100% clear on the program change stuff. If I am reading this correctly, can you store multiple program changes to a single channel? So, could I have channel 1A respond to program change PC 1 and say, PC 43?

PC 1 changes to 1A
PC 2 chagnes to 1B
PC 3 changes to 2A

etc.

Those are all set I"m pretty sure. What you can do is set up as many different patches as you want and call up any of the modules for that specific patch.

 

[guitarslinger]

You can hold down the midi button to have the currently sent PC msg correspond to whatever channel is selected.

I think.

 

[mboogman]

When I first powered up the M4, the PC messages being sent were sending me to (seemed to be) random channels, until I read in the manual that you can change what PC each channel responds to by holding in the channel select button. That fixed me right up, but It would make more programming easier if I could have a single channel respond to multiple PC messages as stated earlier.