Mesa cab guys

[ZEN Amps]

Quick favour guys. I'm not at the studio this week and forgot to measure something - the dimensions of a Mesa 4x12 jack plate. Overall and hole to hole please - wondering if this generic replacement will fit. Thanks!

 

[thegame]

ZEN, Zen, zen...I thought you were a mono input kind of guy. Disappointed.

 

[ZEN Amps]

I promise only to use the bottom left input. Better still, rubber plugs are going in the others.

 

[311splawndude]

Those dimensions you posted above look accurate to me. I measured the plate on my 4x12 Traditional. "hole to hole" looks to be exactly 1 and 1/2 inches. Hope that helps

 

[ZEN Amps]

Yeah big help, thanks man. I meant screw hole to hole but sounds like I'm good. Cheers!

 

[311splawndude]

Oh shoot. Well I also took pics of the plate size but now imgur.com does not want to cooperate. Regardless, what you show looks accurate.

 

[311splawndude]

screw hole to screw hold looks to be exactly 3 and 1/2 inches possibly slightly longer but very slight. I'd have to pull the cab away from the wall, lay it flat and get my other steady hand out

which I would do for you if need a hand

 

[7704A]

I promise only to use the bottom left input. Better still, rubber plugs are going in the others.

What! 4 ohm mono is the way to go.

 

[ZEN Amps]

screw hole to screw hold looks to be exactly 3 and 1/2 inches possibly slightly longer but very slight. I'd have to pull the cab away from the wall, lay it flat and get my other steady hand out

which I would do for you if need a hand

All good man, I appreciate your time. Looks to be the same plate, so 'should' fit. Famous last words.