Modded Marshall Porn (Teaser Clip Added) 😎

[psychodave]

So stupid. I will never understand the silicone, epoxy, spray foam bullshit modder’s use to hide stuff. I know Martin politely paintpened out all the values and colors before he installed them. Very neat and professional. Silicone isn’t even good for boobs…

I understand why they do it.... the pen paint can be removed, the goop is harder to remove. Fortin uses some shit that is really difficult to remove. Everyone hides their mods.

 

[jtgainor]

I understand why they do it.... the pen paint can be removed, the goop is harder to remove. Fortin uses some shit that is really difficult to remove. Everyone hides their mods.

Understand it to a degree, but you’re screwing the customer at the end of the day. If something fails in the goop, it will be a nightmare to repair. Just my perspective on it. To each their own.

 

[Racerxrated]

Where’s the exploded spray paint can???

The ‘afterbirth’ mod?
(Famously coined by Steve K RIP)

 

[Racerxrated]

Here it is.....ugh

 

[sahlomonic]

Oh man....that is hot as fuck.

I wish I had something to contribute. My only Marshal hold beer

Tried mic'ing mine up years ago. Just sounded cold.

 

[jtgainor]

Here it is.....ugh

That’s the one!!!!! $5000 firm I know what I got.


Ps, needs a resistor changed.

 

[mooncobra]

I hate mesas so if it sounded like a Mesa and not a gained up Marshall I wouldn’t own it. Also Nick built this one as a copy and his stuff is great.

There’s no clipping diodes in these amps. Just raw aggression. I can’t wait to record the two of them for y’all

Viva la Nick!!

 

[glpg80]

Here’s a teaser of what’s to come.

Dave gave me permission to share this.

 

[thenine]

I liked the second setting “fuller sound” as you described it best.

 

[RaceU4her]

Here’s a teaser of what’s to come.

Dave gave me permission to share this.

That sounds proper Cameron

 

[glpg80]

That sounds proper Cameron

It means business just like I said. I’m pretty sure it has more gain on tap than the red channel of my Bogner XTC.

 

[RaceU4her]

It means business just like I said. I’m pretty sure it has more gain on tap than the red channel of my Bogner XTC.

What cab was that?

 

[glpg80]

What cab was that?

That’s @psychodave

 

[psychodave]

I was using a Cameron cab loaded with Celestion G12H30 anniversary's.

 

[Detroit1973]

I was using a Cameron cab loaded with Celestion G12H30 anniversary's.

Are the G12H Anni & The Heritage Much Different sounding?

 

[RaceU4her]

I was using a Cameron cab loaded with Celestion G12H30 anniversary's.

you use JB's? i have a cameron 2x12 with scumback 65s that is 16ohm but i havent used it with my mig cause it only has 4/8 outs. i have a 12h30, might just grab another one and put them in the 2x12. that is like the grail tone to me

 

[jtgainor]

Here’s a teaser of what’s to come.

Dave gave me permission to share this.

Sounds like something I need. Still anxiously waiting for clips.

 

[psychodave]

you use JB's? i have a cameron 2x12 with scumback 65s that is 16ohm but i havent used it with my mig cause it only has 4/8 outs. i have a 12h30, might just grab another one and put them in the 2x12. that is like the grail tone to me

I use Suhr pickups. My white nitro has an Aldrich and my blue nitro has an SSH+. Keep in mind, my Aldrich is an older version and sounds different from the new ones. I just measured DC resistance on the Aldrich and it 17.48. The SSH+ is 16.41. I have both pickups set pretty low as well, like close to 3/8 of an inch.

I really like the Anni H30's. They need to be broken in a lot, but once broken in, they have that punch and pop I like out of speakers. The Cameron cabs help as well. They have straight front baffles (marshall, Bogner, etc tend to have the front baffle at a slight slant upwards). I dont give a shit that they say Cameron, I just really like how they sound. Plue the machine screws holding the backs on make for a quality sealed cabinet. Vboutique makes a great cabinet.

 

[Racerxrated]

I use Suhr pickups. My white nitro has an Aldrich and my blue nitro has an SSH+. Keep in mind, my Aldrich is an older version and sounds different from the new ones. I just measured DC resistance on the Aldrich and it 17.48. The SSH+ is 16.41. I have both pickups set pretty low as well, like close to 3/8 of an inch.

I really like the Anni H30's. They need to be broken in a lot, but once broken in, they have that punch and pop I like out of speakers. The Cameron cabs help as well. They have straight front baffles (marshall, Bogner, etc tend to have the front baffle at a slight slant upwards). I dont give a shit that they say Cameron, I just really like how they sound. Plue the machine screws holding the backs on make for a quality sealed cabinet. Vboutique makes a great cabinet.

The newer H30 Annis are made in England; they sound like broken in versions right out of the box. None of that super screechy high end of the previous mic versions when new.

 

[LP Freak]

you use JB's? i have a cameron 2x12 with scumback 65s that is 16ohm but i havent used it with my mig cause it only has 4/8 outs. i have a 12h30, might just grab another one and put them in the 2x12. that is like the grail tone to me

8ohm out to 16ohm cabinet will be fine