Matt300ZXT
Well-known member
I'm in Chattanooga, TN and would prefer local pickup as some of this stuff is kinda heavy, but I'd consider shipping some of the lighter stuff.
First off, I've got a Peavey Classic 50/50 power amp with the old style face. It's in fantastic shape and has been my main power amp for my rack rig. All the knobs/switches work fine and puts out plenty of power, I'm just moving on to my new Marshall 9200 power amp for the rack. It has some scratches/wear, but pretty much on the top from sliding in and out of a rack.
Second, I'm letting my Peavey Classic 60/60 go as well. It's just been in the rack as a back up, I rarely use it. All the knobs/switches work on it too, but the fan is a bit on the louder side. It gets drowned out pretty quickly though. After I got it, I took it to a tech to be checked out and had a new, longer power cord installed, someone has drastically shortened the original and put a cheap plug on it like you'd get at Home Depot or something when repairing a lamp or something. The face on it is every so slightly "newer" looking if you will, but it'll still have a little scratching on the top/bottom from installation.
Third, I'll let my Marshall 1960AV go. You all know what it is. It's a very clean cab with no tolex ripping/tearing or tears in the grille cloth. It's in fantastic shape and still has the original Marshall Vintage 30s in it.
Fourth, is a JCM900 1960A cab that has seen some miles. I don't know if someone toured with it or what but the tolex in some spots has seen better days, though the grille cloth is still in pretty good shape. It still has the original 75 watters in it.
Fifth, I'll let my ADA MP1 go. Everything on it functions as well and already has the Michael Wagener settings in program 1 for that godlike 80s sound. It has newer JJ tubes I put in it last year.
Sixth, I'll post up my Myasnikov Super Lead preamp. You guys know what it is. Check out Leon Todd's Youtube videos if you haven't heard it. I like his sounds, but I just can't really get along with it as much as I'd like to. Plus, I'm moving stuff out to make room for another head I'd prefer so this one's on the chopping block too. The left hand part where the rack screws go is ever so slightly bent but still mounts perfectly. Also, there is one tiny chip in the powdercoat above the power switch, which won't be noticeable when installed in a rack. It has a bright switched added on the front as well as a rear input for keeping the rack rig clean.
Since prices for some of this stuff can vary by location, timing, supply/demand, etc, I'll try my best to post fair prices. If you want to make an offer, or arrange a package deal, hit me up and maybe we can work something out.
50/50-$325
60/60-$250
1960AV-$550
1960A-$300
MP1-$300
Super Lead-$350
I'll post a pic of each but if you want more photos or have any questions, feel free to PM me.
First off, I've got a Peavey Classic 50/50 power amp with the old style face. It's in fantastic shape and has been my main power amp for my rack rig. All the knobs/switches work fine and puts out plenty of power, I'm just moving on to my new Marshall 9200 power amp for the rack. It has some scratches/wear, but pretty much on the top from sliding in and out of a rack.
Second, I'm letting my Peavey Classic 60/60 go as well. It's just been in the rack as a back up, I rarely use it. All the knobs/switches work on it too, but the fan is a bit on the louder side. It gets drowned out pretty quickly though. After I got it, I took it to a tech to be checked out and had a new, longer power cord installed, someone has drastically shortened the original and put a cheap plug on it like you'd get at Home Depot or something when repairing a lamp or something. The face on it is every so slightly "newer" looking if you will, but it'll still have a little scratching on the top/bottom from installation.
Third, I'll let my Marshall 1960AV go. You all know what it is. It's a very clean cab with no tolex ripping/tearing or tears in the grille cloth. It's in fantastic shape and still has the original Marshall Vintage 30s in it.
Fourth, is a JCM900 1960A cab that has seen some miles. I don't know if someone toured with it or what but the tolex in some spots has seen better days, though the grille cloth is still in pretty good shape. It still has the original 75 watters in it.
Fifth, I'll let my ADA MP1 go. Everything on it functions as well and already has the Michael Wagener settings in program 1 for that godlike 80s sound. It has newer JJ tubes I put in it last year.
Sixth, I'll post up my Myasnikov Super Lead preamp. You guys know what it is. Check out Leon Todd's Youtube videos if you haven't heard it. I like his sounds, but I just can't really get along with it as much as I'd like to. Plus, I'm moving stuff out to make room for another head I'd prefer so this one's on the chopping block too. The left hand part where the rack screws go is ever so slightly bent but still mounts perfectly. Also, there is one tiny chip in the powdercoat above the power switch, which won't be noticeable when installed in a rack. It has a bright switched added on the front as well as a rear input for keeping the rack rig clean.
Since prices for some of this stuff can vary by location, timing, supply/demand, etc, I'll try my best to post fair prices. If you want to make an offer, or arrange a package deal, hit me up and maybe we can work something out.
50/50-$325
60/60-$250
1960AV-$550
1960A-$300
MP1-$300
Super Lead-$350
I'll post a pic of each but if you want more photos or have any questions, feel free to PM me.