My Einstein is buzzed

  • Thread starter Thread starter redfulcrum
  • Start date Start date
redfulcrum

redfulcrum

Member
Ok Picked up my Einsein head on saturday and played my first gig with it that nite. :rock:
Sounded Awsome. Mainly used channel 2 for Heavy stuff with master 2 as boost. Channel 1 was set up to setting #2 which sounded great by the way with the gain set at around 2 O clock. I was demonstrating the amp to a friend and switched the mode switch on channel 1 to the 3 rd position and noticed a buzzy hum type sound coming from the amp. I unpluged my loop cables to see if it was something with my delay but the hum remained. If i turned the gain down it would get less noisy but if i turned the gain up it got louder. Any ideas on what might be the problem. :scared: I thought it might be a pre amp tube but. it didnt seem to show its face on channel 2 only channel 1
 
Still could be a pre tube. I'd check each position with a known, working tube.

Hope that's it :thumbsup:
 
I was kind of hoping that i would get some kind of responce from Peter or Duesentrieb. on what they thought. :confused:
 
You must log in or register to reply here.
Back
Top