My new VH4. Loop question.

[CasperDK]

So wednessday is VH4-day for me.
I have searched but never found the answer to the following question.

I want to know if it is possible to use both effect loops at the same time.

My future setup is the VH4 with Axess GRX4 loopsystem infront for a few pedals, and a TC G-force in parallel.
I want to put a booster in the serial loop for solo-boost. All of it controlled by a Voodoolab Ground Control.
Is this possible?

Sorry if it's been up a million times but I'm new here.

 

[bronz79]

All Tc and most multifx work better in serial mode..so i'll use g-force in the serial loop.
G-force don't have a digital boost like g-system or g-major..so you can edit all your patch
-4/-6 dbu (the boost that you want cause in digital a boost is only a release/attenuation)
and the ones that you like boosted tuned to the amp real volume..ora put an analog boost
preamp.

 

[CasperDK]

All Tc and most multifx work better in serial mode..

Only if you need effects like whammy, comp, tremolo, gate. Basically things that go infront of the amp anyway.
No way I'm gonna have a fully digitalized signal.
I only need delay, reverb and pitch. On killdry and mixed in parallel.

And if you put a boost infront of the preamp - at least on an overdriven channel - it is almost only going to create more distortion. Depending on the gain setting.
But for instance a heavily compressed highgain channel - forget about it.

The question still stands btw.