Pedals in loop or in front of Bogner high gain amps (uber)

[LunatiBSW]

Been doing a lot of research and traditionally I used time based fx in the loop. A lot of people have their own opinions, but a lot of what I'm reading is vintage amp related.
I saw a video of lamb of gods rig where they use mxr and boss pedals in front, and they def play high gain the the Mesa marks. I use a carbon copy delay and chorus, and a EHX reverb in the loop now.
Before I tear apart my board to experiment, any fellow Bogner users got some insight? I figure most of his tube loops are similar.
I have a twin jet I'm trying to get perfect.

 

[jc986]

I prefer time based effects in the loop, especially reverb and delay. Chorus is one that can go either way. I am currently running it in the loop but for years I ran it in front with no issues.

 

[GOHOINC]

I'm running an xtc classic, not an uber, but I run everything in front.

 

[LunatiBSW]

I'm running an xtc classic, not an uber, but I run everything in front.

Does your gain tone stay solid when running delay and such in front of your XTC?

 

[reilly]

I run a Fractal FX8 4 cable method with my Uberschall Rev blue, Personally I cannot stand the sound of time based effects in front of and amp when running gain. For me, all time based effects have to go in the loop and it sound way cleaner. Same with my regular pedalboard (also setup for 4 cable method)

 

[GOHOINC]

I'm running an xtc classic, not an uber, but I run everything in front.

Does your gain tone stay solid when running delay and such in front of your XTC?

My time based effects are pretty transparent and everything stays tight but they are more noticeable on dirty channels so I typically back off the reverb a bit, delay stays spot on.